New Brake Set UP

[RAMSES EP3]

Ok so Im getting some new Brakes and thought I would ask and see what you guys think. Im going to get Stoptech Rotors, Okebono pads for the front and the rear and Motol Dot 4 bake fluid and they will be flushing out my old brake fluid and installing everything for $750 Good Deal or Not a Good Deal

I just looked around the rotors in the front cost 180 the rears 160 and the pads are 125 for the rear and 125 for the front plus 45 for the motol DOT 4 Brake fluid and he is going to flush the entire brake sytem and install it seems resonable to me. the above makes a total of $635 Plus his install charges.

[Lucid Moments]

That sounds high as hell to me. Are these the OEM sized Stoptech rotors?

[MugsyTheGr8]

thats alot of money for pads rotors and fluid...

[RAMSES EP3]

even tho its all installed

[MugsyTheGr8]

even tho its all installed

i guess thats where all the money is going, because pads rotors and fluids cost well under $400.

[RAMSES EP3]

its complete for the front and the rear

[RAMSES EP3]

I guess I should've specified that.

[MugsyTheGr8]

I guess I should've specified that.

when i said under 400 i meant all four corners.

[liquid cooled]

go with RSX brakes, for that price you can get at big brake kit, your back brakes dont really do crap anyways.

[RAMSES EP3]

updated.

[T_Virus]

if your getting a whole new set up, you might as well get some stainless steel brake lines as well...I spent a little over 600 for powerslot cyro rotorts, akebono street performance brake pads, stoptech stainless steel brakelines.

[bmyers4321]

do this yourself it is really not that hard. if anything atleast the rotors and pads and then take your fluids and get that done only.

[RHCP0801]

changing brakes and rotors are so easy, do it yourself but maybe get the fluid done by someone else

[RAMSES EP3]

if your getting a whole new set up, you might as well get some stainless steel brake lines as well...I spent a little over 600 for powerslot cyro rotorts, akebono street performance brake pads, stoptech stainless steel brakelines.

was that installed?

[RAMSES EP3]

i didnt end up going with this setup but know need some help with choosing a descent good setup what do you guys recomend for something a little more aggresive then OEM brake system