Yup, wrong kal bro
I just uploaded my k20a3 base map to get started and launch control won't work, anybody else have these problems? O and I have a p0661 code for intake manifold butterflies I believe, do I have the wrong map loaded? I believe that code is only for rsx's
Yup, wrong kal bro
I uploaded k20a3 base kal, is that not the right one?
In regards to the launch control, I don't think it's enabled by default. You have to modify whichever kal you're going to use.
Thanks, would that have anything to do with my launch control not responding?
If you haven't enabled it then yes that's probably why
Just choose your kal, edit it so that launch control is enabled and set at whatever RPM you want (3000 rpm is a good starting poing), then just upload it. Only works at speeds of 3 mph or less if I remember correctly.
I've found that the launch control is only usable on the street. On the track, the better grip means it needs more throttle to avoid bogging, and the fuel cut "bounces" too slowly to be usable (at least with the JRSC). So don't put too much faith in Kpro's launch control until you've had a chance to try it.
It's not just you bro, I'm running the new update of kmanager and my launch control won't work either. It's starting to piss me off.
i have downloaded the newest version of k-pro but haven't gotten my car tuned with the newest version. launch control worked fine. i made sure to take off the lean protection as well.
im still running the previous version in my car using the old way
which i actually the same the only thing really changed was the full thottle shift
i build about 7-9psi on my big turbo and i shoot out flames when i use my "two step"
i once had a 592whp ep on pump gas, i sold it and bought a Z
(heed my advice i know what im doing)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks