DIY: UKDM Type R tail lights and bumper removal (7/31 - Pics added)

[wizDUMB]

great write up

[nizmoluvep3]

what year??? 02-03 - 04-05?

You can try ebay type in jdm taillights or you can try ebay.co.uk
you can also, post in the WTB classifieds section
Look out for my for sale thread comin soon

[bizarroxxx]

those lights are tit

[Blue03Si]

Great write up. I used it to install my UKDM tails last night. Good job!

[oogy-boogy]

Thanks....glad to hear it worked out for you.

[SiN05]

Awesome. Where would one be able to get a pair of UKDM tails ?

http://www.ephatch.com/forum/showthread.php?t=50145

[EVOKIN]

http://www.ephatch.com/forum/showthread.php?t=50145

Shoot! I can't get in.
I was thinking about doing this with the stock lens. Anyone did it with the stock lens?

[Shead]

good job!

[oogy-boogy]

Shoot! I can't get in.
I was thinking about doing this with the stock lens. Anyone did it with the stock lens?

You need either 100+ posts without whoring or sponsor status.

[EVOKIN]

You need either 100+ posts without whoring or sponsor status.

I have more than 100 the last time. Been busy so my post count is low this time around.

[WhiteComet]

are pics down?

[Tortoise]

damn i was jus gonnna follow the DIY bump for fixed pics!

[civicsibaby04]

great write up. it help me alot when i was installed my ctr tail lights

[oogy-boogy]

Sorry guys, not sure what happened to the host. ugh...

[Powers]

Very helpful. I just got mine done. To unclip the wires a pen filler really did work good. Just like it said unclip the back lightly prying on it with a small flat head screw driver. Then at the other end of the clip where the electric connecters are take theres a clip holding them in. the metal tip of the pen filler and push it in. You should be able to see the 2 inside clips drop when you remove the pen filler. Then lightly pull the wires out.