a/f tunning- help

[jeenyusss]

well my car is having some misfire codes, and my a/f on the basemap is really sparatic.

i wanted to see if anyone can give me some advice on trying to level out the a/f

i am a total newbie with kpro, and have been trying to figure things out from hondata videos and such

http://hondata.net/media/kprotrainin...mapediting.mov

http://hondata.net/media/kprotraining/fueltrim.mov


i did post some datalogs in another thread, and i know im going to probaly feel like an idiot, but how do you go about checking out the datalogs, i posted them but its just a blank kpro screen when i open up kmanager.


also if there is a local that would help and knows how to tune it up, name your price! thanks!

[02nhbpep3]

Subscribed, I'm in the same boat as you, I'm in the process of looking over my datalogs and making english from all of the numbers lol. Hondatas training videos were very helpful though.

[dustyboner]

post up your .kal and a .kdl

[jeenyusss]

http://www.ephatch.com/forum/showthread.php?t=48630

i have those datalogs,

what do you mean by kal?

im using the k20a3-civic-550cc120hm-revhard-10psi calibration


my injector size (which i changed) are siemens 630cc injectors

i did those datalogs and know how to save and post them, but i dont know how to read them. it just shows nothign when i do? im such a newb with this

[dustyboner]

so you are using the k20a3-civic-550cc120hm-revhard-10psi calibration and the only thing you have changed on it was the injectors, right?


for viewing the datalogs; open options/graph templates



then set them up how you want them.
this is how i like mine set up.


then just click on datalog/load


and pick the .kdl file you wanna see

[dustyboner]

then you can click on any point on the graph. when you do it'll show you the data for everything at that point. look at the pic below, see how at the point selected it shows VTS as being "on", so your on the hi cam. and your A/F is 15.87. so if you wanna add a little fuel......

-----------------
make sure you have 'follow v-tech' and 'follow cam angles" checked

-----------------
then click on 'Tables' and it'll automatically put the spot you selectd on the graph in red on the hi-cam ignition table and at the correct cam angle. just click on to change to the fuel table and select the red boxes. then to add fuel just hit (ctrl + I ). or to decrease fuel ( ctrl + D )

[jeenyusss]

nice thanks for the help i appreciate it, im going to take a stab at it in the next couple of days

[NrGiNnY14]

goodluck kev, if you run in to any serious problems let me know, my friend that lives right by me knows k-pro well and can probably street tune it

[talonXracer]

Kevin are you gonna be around on Monday? If you can come over to Highland we can do some quick street tuning.

[jeenyusss]

what time?