a3 jrsc on an a2

[classiccelica]

Can this even work right? Can you put the supercharger for the a3 on an a2?

[Strife]

I don't think this works. The holes in the JRSC don't all bolt up right.

[thisisagame24]

I don't think this works. The holes in the JRSC don't all bolt up right.

that makes no sence at all.....the block for the k20a3 and k20a2 are the same

so it should bolt up fine. you would need a smaller blower pully because the crank pully is smaller on the a2

[LaoKidd2k]

i think all you need is the rsx tensioner

[4angrybadgers]

The only difference in the a3 and a2 blower bodies is that the a3 rotors are stacked vertically (vs. horizontally on the Type-S), so it can fit in the tighter engine bay.

[JohnyBlaze]

It works, it's been done. Only the tensioner assembly (bracket) needs to be slightly modified to fit correctly.