What Swap Should I Get FAQ

**bchaney** · 07-22-2008, 08:01 PM

Could someone elaborate on the a4 water port issue?

**jalep3** · 07-22-2008, 08:25 PM

^^yeah that

**NHBP ep3** · 07-23-2008, 12:24 AM

yes what is this talk about the k24a4 and k24a2 water port issue?

**frm_808** · 07-23-2008, 12:52 AM

find your answers on k20a.org

**davisj3537** · 07-23-2008, 08:18 AM

The two easy plug and play fixes are getting a rbc and karcepts adapter plate to go with it or you can get the hasport adapter.

**NHBP ep3** · 07-23-2008, 04:20 PM

if i was to get the hasport adapter i could avoid getting the rbc and just use the tsx mani?

**davisj3537** · 07-24-2008, 05:58 AM

Originally Posted by NHBP ep3

if i was to get the hasport adapter i could avoid getting the rbc and just use the tsx mani?

You can use the tsx manifold in place of the rbc. you still need the karcepts adapter. Good point. I forgot all about using the tsx manifold.

**bchaney** · 07-26-2008, 07:32 PM

So 310cc injectors for an a1/a4 without kpro... what about with kpro?

**Guardian** · 07-27-2008, 02:12 AM

Originally Posted by bchaney

So 310cc injectors for an a1/a4 without kpro... what about with kpro?

stock

**davisj3537** · 07-27-2008, 10:40 AM

With kpro you can keep stock injectors and mod all you want...but without kpro you can't have any mods and must use 310cc.

**cantonep3** · 08-01-2008, 10:53 PM

found some good info for a quick comparison sheet

http://en.wikipedia.org/wiki/Honda_K_engine

**davisj3537** · 08-02-2008, 11:30 AM

Originally Posted by cantonep3

found some good info for a quick comparison sheet

http://en.wikipedia.org/wiki/Honda_K_engine

Damn good find sir!

**magmagik 1** · 08-06-2008, 03:30 PM

a4 bottom high comp pistons and a build a2 head..

**bchaney** · 08-06-2008, 04:29 PM

Did you ppl read the first post?

Must have things to sell...

Thread: What Swap Should I Get FAQ