Rear Sway

[PeepingSnipa]

I was just wondering what would be my best option for a rear sway bar, so that I will not have any clearance issues with my HKS exhaust? Any help will be appreciated.

-Thanks

[mustclime]

do not get progress.

[PeepingSnipa]

I know the 24mm progress has a clearance issue, but what about the 22mm(would it be worth it)?

[EPSU3]

go to clubrsx and buy a used rear sway from a 05-06 Type S. A fraction of the price of aftermarket or Type R sway bar. It's 21mm and the type R is 22mm. I paid $40 shipped for mine with bushings.

[PeepingSnipa]

What would be a reasonable price on a CTR one? also, will I need bushings?


<-----noob

[frm_808]

you should

[PeepingSnipa]

Ok, thanks a bunch for the info. I ended up ordering the CTR one, so I hope it fits.

[jh604]

Ok, thanks a bunch for the info. I ended up ordering the CTR one, so I hope it fits.

i order a CTR one too...i also hope it fits mine haha

[moso]

the progress is good i dont know why people dont like it even though there are some issues but it is thick and once you have it on its awesome and as far as your exhaust i will highly recomend u get it re piped under axle that way you have more better free flow and you wont have to worry about it hitting your sway bar hope the info helps u out

[frm_808]

i order a CTR one too...i also hope it fits mine haha

Ok, thanks a bunch for the info. I ended up ordering the CTR one, so I hope it fits.

it will

[jh604]

it will

im running spoon 4-2,2-1 race header and spoon midpipe with OEM axleback. when i installed it, it cleared the OEM (USDM? im from canada UKDM?) front sway and the OEM rearsway...i also have a EM2 front sway coming so i hope the EM2 and the CTR rear sway will go good together

[AliG-EP3]

im running spoon 4-2,2-1 race header and spoon midpipe with OEM axleback. when i installed it, it cleared the OEM (USDM? im from canada UKDM?) front sway and the OEM rearsway...i also have a EM2 front sway coming so i hope the EM2 and the CTR rear sway will go good together

You will thoroughly enjoy that combo, reduces the understeer greatly

[NitroBoarder]

do not get progress.

but progress is fine if you are running a stock exhaust or even a midpipe upgrade correct? just need the tie bars for the 02-03's.

[ep_hatcher_510]

but progress is fine if you are running a stock exhaust or even a midpipe upgrade correct? just need the tie bars for the 02-03's.

no, even my stock muffler was rubbing it. but is just a 20 bucks fix at a shop to put like a 1/2 or 1 inch pipe extension to the piping.

[T_Virus]

The CTR sway bar shouldn't hit the HKS Hi-Power Exhaust...because I just got mine done not too long ago along with the skunk 2 tie rod and skunk2 gold lca...sorry no pixs because I don't have a digicam...lol...