DIY: Depo Projector Headlights Retrofit TSX HID

[Chazwick05]

purrrrrrrty

[freelunch]

Haha guys, I'll try to get cut off pics, but it looks EXACTLY like a TSX. Its all over the net. The reason why the horizontal line is perfectly 180 degrees is because it the projector housing is the exact same dimensions and mounts in the exact same location with no modding. The line is as straight as DEPO made the mounting brackets for the lights.

[BaLisTek]

i need to retrofit my headlights. Good job

EDIT: i have the lhd halogen projectors now, isn't the ultimate setup the tsx projector with the halogen shield. I kinda remember it being something like that

[Tortoise]

Where can i get these headlights? God i wanna retrofit but i dont have the skill or patience. I had all the parts to do it on my Lexus but i got scared and sold them kuz i had no idea what to do wit ignitors and ballasts and shit it all scares the shit outta me haha.

[locoep3]

nice i will do this to my boys car .........

[03ep3 stapel]

good plan ill try it

[mattism78]

Good job, the labor I know I can handle. I start getting nervous when electric comes into play. I'm one of those guys who can wire something in the house and the toaster come on.

I apologize if this is a complete newb question, but why can't you just fit HID bulbs to the original projectors inside the Depo lights?

[oneglory]

Good job, the labor I know I can handle. I start getting nervous when electric comes into play. I'm one of those guys who can wire something in the house and the toaster come on.

I apologize if this is a complete newb question, but why can't you just fit HID bulbs to the original projectors inside the Depo lights?

there probably are many reasons such as low quality projector, poor cut off/beam pattern, etc.

[freelunch]

I updated the 3rd post with some videos showing the light output on a pitch black highway road. Ballin!

[Shead]

good job my man!

[macdady678]

Do you guys know the part numbers for the OEM Ballast, Ignitor, bulbs, projectors for the TSX HID setup? I'm looking on Ebay for some of these parts, but I never realized it was this much. My sister knows a guy who works for Honda, so he may be able to get me these parts cheaper, but he needs the part numbers. Thanks.

[K-Shark]

33147-S2A-A11
harness

33129-S2A-J01
ignitor

33119-S2A-J01
ballast

lemme know if you could pass on the deals to me, sir.
i might need the ignitors and harness.

[blackyEP3]

For the DRL, could you just take that fuse out? (is there a fuse for that?)

[vUpac]

thats clean!! Im digging those headlights. Whered you order them from??

[Kerby]

Can somebody photochop me a pic with a red projector housing?

also, after the headlight has been taken apart... how the hell can I get the old glue off? completely off. I was planing on using goo-gone on the glass part.

and what silicone/adhesive should I buy to put them back together? Boat/water application grade silicone?