My next project.. mugen related!!

[charles]

goodluck man. please dont ruin the duct

[ep3civic2nr]

my second duct should be done soooon. i made mine from scratch but your on the right path sir.

[T_Virus]

I like it, but with this mod, you'll have to relocate the front license plate right?

[jaeguyoon]

wooot

[STP03BlueSI]

I like it, but with this mod, you'll have to relocate the front license plate right?

Nice project!

I know once i get moved I will be doing brake cooling ducts for my BC 2 kit.

[ShadySi]

wooo, you're finally doing it

[FoReVaPmP]

[thisisagame24]

[lbk02si]

SUBSCRIBED!!! yea, i was wondering about the liscense plate too??? i don't want that kit that relocates to the side of the bumper. if the fitment is as good as the real thing, then COUNT ME IN i will def. buy one from you!!

[asaness241]

can you please make a square piece for emblem of 04-05 mugen grill please... THANK!!! YOU!!!

[v1c10us]

thanks for the suggestions. If my method doesn't work i will consider that. Due to the nature and bends of these parts especially the deflector.. i need something that can easily bend. This is why i will make a latex mold and a plaster mother mold. The plaster mother mold will give me the strength and confinement i need while casting. I can then remove the latex mold from the plaster mold and peel off the flexible/durable latex mold off the plug. I really think this way will work, we shall see soon

yeah that would work.
I've never made a mold before so I don't have any suggestions for that.
What are you going to pour in the mold?

[Heitzke]

Good luck brotha. Tons of respect for taking it upon yourself to try this.

[BaLisTek]

ya guys... after thinking bout this for many hours. I think I will have to make a silicone mold for the actual duct and do the latex mold for the deflector. Really didn't want to mess with silicone because its the most expensive, hardest to mix, and hardest to pour. I have confidence tho.

Thanks for all the support guys.

[v1c10us]

you might want to look into expandable foams depending on what you're going to be pouring in the molds.
You can make a box of wood and place the object in there and spray expandable foam inside of it, pop the box off and cut the foam in half and you'll have a 2 piece mold that you can use multiple times.
If you're doing anything really hot though it might be an issue.
edit: I did some research and i found this page to be fairly informative http://www.jgreer.com/mold_making_101.htm

[robhep3]

Oh. We're not talking foot fungus here, are we?