Turbo clutch recommendations

[minivan_assassin]

I went to tune this week and at about 5k rpm my clutch was giving up the goat. Looking for something that can reliably hold around 300hp, but isn't "on/off." Car's straight up DD and my girlfriend drives it sometimes so I don't want her bitching (more). No drag racing.

Suggestions?

[itchy5]

my girlfriend drives it sometimes so I don't want her bitching.

Suggestions?

http://www.clutchnet.com/product.php...4&cat=0&page=1
http://www.clutchnet.com/product.php...9&cat=0&page=1
should do the trick

[clutch797]

I ran this setup except i had the 6 puck sprung clutch. It will hold. I still have the disk if you want it.

[dobbs02si]

If you dont race the Exedy stage 1 will work, Ive been using it for over a year now. Its only slipped once but that was on slicks so go figure.. The pedal pressure is softer but it holds better than factory.

[sidriverep3]

i liked my exedy stage 2 3 puck for when i was around 300whp. much less and ull slip. i dont know what u mean by the stage 1 would work, thats wayyy too light of a pressure plate for 300 whp. u can get a street disk and just get a really heavy pressure plate and ull be good too, that way u dont get the chatter. but go with carbon or kevlar for a full face.

adam

[Tnhatch03]

ACT Heavy Duty Clutch with Flywheel...

268 whp, 232 tq.