does anyone have a diy or something for tightening the hand brake?
does anyone have a diy or something for tightening the hand brake?
I'm going to assume you know how to remove the cover thingy, once you get that off its pretty straight forward
theres a bar with a cable in the middle connected to the ebrake handle and two cables on either side. The cable in the middle has a bolt on it or something like that, thats the one you need to tighten, the ebrake should be fully engaged in 7-8 clicks
he means under the center console towards the back seat there is an adjusting nut in between the cables where they meet the handle assembly. i dont remember the size but just use that to tighten it
ok cuz mines goes up like 11clicks and it still doesnt fully lock the back wheels i want it to lock the rear wheels when i yenk it up
You can find the procedure for adjusting the Parking Brake lever on page 19-7 of the Helms manual.
If you don't have one, you can download it here (18.73MB):
http://netload.in/dateid3511d2311633...Manual.pdf.htm
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks