hand brake

[moso]

does anyone have a diy or something for tightening the hand brake?

[v1c10us]

I'm going to assume you know how to remove the cover thingy, once you get that off its pretty straight forward
theres a bar with a cable in the middle connected to the ebrake handle and two cables on either side. The cable in the middle has a bolt on it or something like that, thats the one you need to tighten, the ebrake should be fully engaged in 7-8 clicks

[metalviper]

he means under the center console towards the back seat there is an adjusting nut in between the cables where they meet the handle assembly. i dont remember the size but just use that to tighten it

[moso]

ok cuz mines goes up like 11clicks and it still doesnt fully lock the back wheels i want it to lock the rear wheels when i yenk it up

[adrian1281]

You can find the procedure for adjusting the Parking Brake lever on page 19-7 of the Helms manual.

If you don't have one, you can download it here (18.73MB):
http://netload.in/dateid3511d2311633...Manual.pdf.htm

[talonXracer]

You can find the procedure for adjusting the Parking Brake lever on page 19-7 of the Helms manual.

If you don't have one, you can download it here (18.73MB):
http://netload.in/dateid3511d2311633...Manual.pdf.htm

We also have the manual in the DIY stickies....

[v1c10us]

Be careful not to overtighten it, it would burn out your rear brake pads