Exhaust hitting my Progress sway bar

[Amoney47]

i have a greddy ti-c with a progress sway bar and its hitting like crazy. my car is lowered 2 and a half inches and even adjustable endlinks might no fix the problem. what should i do??

[moso]

either run under axle exhaust, get rid of the exhaust, or get a new sway bar because a lot of people have the same problem

[nos4mao]

Im having the same problem man! I own the Ti-C and the CTR rear sway and Im having banging issues! I have the Corsport endlinks too and Im still having issues!

Thanks,
Matt

[mustclime]

progress bars have this problem....

[SinisterCivicSi]

its only with some exhausts... not all.

you can bend your exhaust hangers slightly to lift it off the bar or place some radiator hosing on your bar and zip tie it... thats what i did with my hks exhaust. mine never tapped until the swap.

[moso]

if you lift it up it will hit the floor panel i have the apexi n1 with the 24mm solid progress sway and i have no problems only when making tight left turns it raddles a lil bit but i am going to run under axle