I dont have a DIY but I still have the instructions I could scan them I guess, as for an accurate drop I had mine on a lift and the up and down and up and down trick was used.
Hi, Im looking for a megans racing coilover installation guide and guides to adjust the coilovers. does any one know any tricks or ways to accurately measure the drop and eveness with coilovers?
thanks in advance guys!
Last edited by fatathaland; 10-25-2008 at 10:45 PM. Reason: thread title formatted
I dont have a DIY but I still have the instructions I could scan them I guess, as for an accurate drop I had mine on a lift and the up and down and up and down trick was used.
just remember to support the LCA or you'll pop the front axle out.. it's a common problem when lowering the ep.. and as far as accuracy, you just gotta count the coils and then hope it's even. but bet that there's gonna be a lot of lifting and dropping. just use a lift or hydraulic jacks..
Ok I am at work tonight but I will scan and ptthem tomorrow it is straight forward though. This was my first suspension swap and I had no issues.
How long did it take you to do this and what type of tools? Im trying to see if somehow I can do it myself or if I have to waste money and send it to a shop.
ahh yes another local ep also ordered them so i think we are goign to install them ourselves. haha ill see if i can make a DIY for other peeps.
i didnt get tracking numbers yet =[
took me about 3 hours I'm sorry I havent posted the directions yet I've been busy it is easy if you take your time. My pass. axle popped out but went right back in bt I have heard horror stories of them taking hours to get back in. My sugestion to keep them in is too use zip ties to hold everything up.
sooo...anyone? i jsut received them so i plan to start soon. is there anything else i need? lube? special tools?
its never goign to happend...so i just did it myself and installed them already
Its super easy.. just a few bolts then its just measuring each cornner to make sure everything is even.
-Rob
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks