Megan racing coilover install guide

[jh604]

Hi, Im looking for a megans racing coilover installation guide and guides to adjust the coilovers. does any one know any tricks or ways to accurately measure the drop and eveness with coilovers?

thanks in advance guys!

[ALep3]

I dont have a DIY but I still have the instructions I could scan them I guess, as for an accurate drop I had mine on a lift and the up and down and up and down trick was used.

[socmex7]

just remember to support the LCA or you'll pop the front axle out.. it's a common problem when lowering the ep.. and as far as accuracy, you just gotta count the coils and then hope it's even. but bet that there's gonna be a lot of lifting and dropping. just use a lift or hydraulic jacks..

[jh604]

I dont have a DIY but I still have the instructions I could scan them I guess, as for an accurate drop I had mine on a lift and the up and down and up and down trick was used.

instructions are good its a start atleast. haha

[ALep3]

Ok I am at work tonight but I will scan and ptthem tomorrow it is straight forward though. This was my first suspension swap and I had no issues.

[403ep3]

How long did it take you to do this and what type of tools? Im trying to see if somehow I can do it myself or if I have to waste money and send it to a shop.

[jh604]

How long did it take you to do this and what type of tools? Im trying to see if somehow I can do it myself or if I have to waste money and send it to a shop.

it seems pretty straight forward. just remember to support the trailing arm so the axles dont pop out.

off topic...did you get yours yet?