Close

Results 1 to 5 of 5

Thread: rsx-s shocks

  1. #1
    Registered User upinsmokep's Avatar
    Join Date
    Apr 2008
    Location
    Vancouver
    Posts
    25

    rsx-s shocks

    i have EP s-tech springs on my 2004 right now
    could i just swap out my stock shocks for 2004 rsx-s ones??

    thx

  2. #2
    Registered User upinsmokep's Avatar
    Join Date
    Apr 2008
    Location
    Vancouver
    Posts
    25
    i realize i need rsx-s tie rods as well

  3. #3
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    They will bolt in the front, the rear struts are too wide at the bottom mount and need to be ground down to fit the EP3 chassis.
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  4. #4
    Registered User upinsmokep's Avatar
    Join Date
    Apr 2008
    Location
    Vancouver
    Posts
    25
    yea, i'll have to grind the rear ones.....

    but could i use my tein EP specific springs with the rsx-s shocks??

  5. #5
    Site Sponsor jw1's Avatar
    Join Date
    Jul 2004
    Location
    az
    Posts
    101
    The shock damping probably won't be much better than your stockers if that is what your concern is. I'd go with aftermarket shocks for any lowering springs. Unless your current shocks are blown, which, in that case, just use the RSX-S if you already have them, otherwise, go aftermarket.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •