What Exactly do you mean by not running
Won't start?
Won't Crank?
Won't Stay on?
How many miles do you have that you think you slugged up your filter that bad for no fuel to be getting to your motor?
my car ( 2003 ep3) is not running . i think its because of either fuel filter got too dirty or probably my fuel pump is not working.. so ima just try to change the fuel filter first .. but i don no how to do it....can you guys show or tell me how to change the fuel filter.... pics or DIY would be nice... ASAP plz.. cuz i need my ep to go to school.......thanks
Last edited by fatathaland; 10-23-2008 at 12:52 PM.
What Exactly do you mean by not running
Won't start?
Won't Crank?
Won't Stay on?
How many miles do you have that you think you slugged up your filter that bad for no fuel to be getting to your motor?
well first my car was running fine but sudden it just died.. i tried to start it again then it did stated but for like 10 second... i tried to start it but it wont start... all i hear is da cranking sound... for the fuel filter ,,, does it mean dat i have to take out ta back seat .. and take out that metal cover thinggy ? is the fuel filter is inside dat thing ? do i have to do anything els?
guys ??? any help around here ??
The fuel filter is the complete cap portion that the pump, sump filter, regulator, and fuel level sender is attached to. In the DIY section near the first posting there should be a stickies page, open that page and you will find a link to the Helms manual. This will help you troubleshoot your issues and show you how to replace the assembly. There are also several very good threads concerning the fuel system in the DIY and engine section. Try a search of the stickies.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
is walbro is the stock one we use? or the performance one.. cuz i just wan to replace mine with a stock one.....help me
Man I hope you get this fixed... You really need to get to school, cause this was painful to read.
Ok, so 47 is the fuel pump assembly. If you wanted to replace the filter, you must buy the whole pump assembly?
What is number 9 in this diagram? It's referred to as a "canister filter" in the catalog. What is it for?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks