Frustration,...Couldn't make a clean pass

[akilbrid]

I went to the track today for the first time in a while.

I made 5 passes, and for some reason, it was very difficult to go through all the gears without grinding. In fact, it happened in a gear each pass.

I would shift to the gear and it would grind like i didn't push the clutch in far enough, but it was to the floor.


Is this a syncro, gear, or tranny oil problem?

I've been to the track 15+ times before and it never seemed so difficult to make a clean pass.

My setup:

k20a3 engine
k20a tranny with 5.0 final drive
kpro
bolt-ons


HELP!!!!

[akilbrid]

bump for answers

[itchy5]

bump for answers

changing tranny oil never hurts. it could be syncro too.. or maybe ur pulling the gear out just before the clutch disengages?

[clujalolo]

could be a synchro, but does it happen in only one specific gear or its always a different one, cus i dont think ALL your synchro's are gone.

[akilbrid]

could be a synchro, but does it happen in only one specific gear or its always a different one, cus i dont think ALL your synchro's are gone.

Happened once in 2nd, once in 3rd, and once in 5th on the track.

I'm at a loss on what to do. Do i need to adjust my clutch line??

This pisses me off so much, i'm thinking of putting my car back to stock if I can't find a solution.