pics of car
I bought the car about 3 weeks ago, and the guy had extensive suspension work done to it, but wasnt very knowledgeable about the components.
The car was looked over by a mechanic who said "its a properly lowered car - done right".
How do I go about raising the car a bit higher off the ground and making the suspension less harsh?
The ride height is about 8" and the pics here show the passender side suspension mount complete with what looks like an valve screw and compression nut.
Last edited by revelations; 08-16-2008 at 02:35 PM.
Soo is your suspension height adjustable? IF it is just pull the wheel off and adjust the perches.
You turn the knob on top of the strut to control the dampening.
and is that a wing on your car? and your engine bay looks kinda dirty lol.
Last edited by ep_hatcher_510; 08-16-2008 at 05:54 PM.
Is my suspension ride adjustable? I guess ill have to pull the wheel off.... and take pics!
Ya its a surfboard that the previous owner had put on!
The engine bay is coated in some oil sealant shit to keep rust down.
Get pics of the springs or coilovers. Sorry to hear that the car has a pos wing on it I hope the holes to arn't bad if you remove it.
That is not an adjustable coilover suspension. You will actually need to change the springs in order to raise the car.
125,000 kilometres... and thats what living in the north gets ya!
Clean title.... its been acid washed apparently.
Check out these for that ride hight....
http://www.ephatch.com/forum/showthread.php?t=51841
looks like your shocks are kyb's and the springs could be H&R's or neespeeds.
the hfp kit will really wake up your suspension and get your ep where it need to be to handle.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks