trippy can u go lower in the fronts?
i LOVE THEM WORTH THE MONEY !!
On the fronts I know you have to use a component from your stock front struts, what piece is it, the top hat? Does it also require you use the bearing?
I"m not totally sure of this bearing I speak of, I haven't actually seen if but have heard people refer to it when talking about rattling noises coming front their front wheel/strut area while driving, has something to do with a bearing being worn down so its metal on metal..
Helped a member install a set of these last night. The rde and the quality where much higher than i expected for $200. The ride quality was even to my Mugen SS and the handling seemed a tad better or similar to my Mugen SS. I'd highly suggest them to anybody who is on a budget and needs to replace worn out struts or wants a simple coilover system for a DD.
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
Id say I have a good 10k+ miles on them and all is great... Still hold ride hight and ride quality is still there...
Installed mine last night. Went great besides adjusting the ride height. Try and set the ride height BEFORE you put them on. It makes it much easier and saves a lot of time.
You will reuse the top hat and the bearings as pictured below. They will fit perfectly within the spring and spacer piece Raceland provides.
These are the bearings. I bought new ones for this install because I knew the old ones were horrible.
Let me know of any other questions I might be able to answer.
Wow. I have the Mugen SS and now I'm thinking about getting these Raceland coilovers. They sound really great! Good thread guys.
Here's the link to the Raceland site (ep3 kit) if anyone needs it:
http://www.racelandus.com/p-61-racel...2002-2005.aspx
Currently $210 before ship/tax.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks