Raceland Coilover Suspension

[trippy]

i LOVE THEM WORTH THE MONEY !!

[kevinlopezzz]

trippy can u go lower in the fronts?

[charles]

trippy can u go lower in the fronts?

here you go.

Im am this low in the front


and i can go lower by this much

[slate13530]

i have been looking these coilovers for a long time(when charles was brave enough to give it a try) and if i will use these for DD only
do you guys recommend them??

thanks.
from a broke college student with a hideous rear wheel gap...

This has been a pretty hot topic around here.

From the comments they are good for DD. Also there are several pics posted with the cars slammed.

[FromTheInside]

On the fronts I know you have to use a component from your stock front struts, what piece is it, the top hat? Does it also require you use the bearing?

[ShadowEP3]

On the fronts I know you have to use a component from your stock front struts, what piece is it, the top hat? Does it also require you use the bearing?

yes its the top hat..which bearing are you reffering to?

[Andrew]

yes its the top hat..which bearing are you reffering to?

uhhh this might be a TJ but for the top hats. could i just regrease the bearings and it should be cool? because right now it makes the clunking noises and such

[FromTheInside]

yes its the top hat..which bearing are you reffering to?

I"m not totally sure of this bearing I speak of, I haven't actually seen if but have heard people refer to it when talking about rattling noises coming front their front wheel/strut area while driving, has something to do with a bearing being worn down so its metal on metal..

[MugenReplica]

Helped a member install a set of these last night. The rde and the quality where much higher than i expected for $200. The ride quality was even to my Mugen SS and the handling seemed a tad better or similar to my Mugen SS. I'd highly suggest them to anybody who is on a budget and needs to replace worn out struts or wants a simple coilover system for a DD.

[03Si757]

Id say I have a good 10k+ miles on them and all is great... Still hold ride hight and ride quality is still there...

[CHASEEE]

Installed mine last night. Went great besides adjusting the ride height. Try and set the ride height BEFORE you put them on. It makes it much easier and saves a lot of time.

You will reuse the top hat and the bearings as pictured below. They will fit perfectly within the spring and spacer piece Raceland provides.



These are the bearings. I bought new ones for this install because I knew the old ones were horrible.



Let me know of any other questions I might be able to answer.

[ragebomb]

Helped a member install a set of these last night. The rde and the quality where much higher than i expected for $200. The ride quality was even to my Mugen SS and the handling seemed a tad better or similar to my Mugen SS. I'd highly suggest them to anybody who is on a budget and needs to replace worn out struts or wants a simple coilover system for a DD.

Wow. I have the Mugen SS and now I'm thinking about getting these Raceland coilovers. They sound really great! Good thread guys.

Here's the link to the Raceland site (ep3 kit) if anyone needs it:
http://www.racelandus.com/p-61-racel...2002-2005.aspx

Currently $210 before ship/tax.

[FromTheInside]

These are the bearings. I bought new ones for this install because I knew the old ones were horrible.




Let me know of any other questions I might be able to answer.

Where did you get the bearings at?

[CHASEEE]

Where did you get the bearings at?

myhondapartsstore.com

[FromTheInside]

myhondapartsstore.com

thank you