Close

Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 92
  1. #46
    Registered User
    Join Date
    Sep 2009
    Location
    DFW,Tx
    Posts
    26
    Question about Type-S axles. Will the ep3 intermediate shaft work with Type-S axles (02-04)? or do i need a type-s intermediate shaft?

  2. #47
    AngryYoda.com guy. ragebomb's Avatar
    Join Date
    Jul 2003
    Location
    Oregon
    Posts
    312
    Quote Originally Posted by Boostedtaco View Post
    Question about Type-S axles. Will the ep3 intermediate shaft work with Type-S axles (02-04)? or do i need a type-s intermediate shaft?
    It will work. I did not have to swap that shaft for my conversion.

  3. #48
    Registered User
    Join Date
    Sep 2009
    Location
    DFW,Tx
    Posts
    26
    cooool. thanks!

  4. #49
    AngryYoda.com guy. ragebomb's Avatar
    Join Date
    Jul 2003
    Location
    Oregon
    Posts
    312
    Quote Originally Posted by Boostedtaco View Post
    cooool. thanks!
    No problem. Separating the intermediate shaft from the stock axle was really difficult for me though. Make sure the car is high enough off the ground that you can get a chisel or something in there to whack it apart.

  5. #50
    Registered User
    Join Date
    Feb 2013
    Location
    washington dc
    Posts
    37
    I know title says 02/03 ep with 02/03 DC5 Type S Parts

    But to confirm you can also use a swap from a 04 model right 02/04 RSX-S?

    Also I found a RSX-S 5lug setup with out calipers can I reuse the EP3 calipers with the 5lug conversion or will I need the RSX calipers?
    Last edited by dreman; 03-24-2013 at 08:33 PM.

  6. #51
    that guy w/ the face poeticfinesse21's Avatar
    Join Date
    May 2010
    Location
    Chicago
    Posts
    493
    All 02-04 RSX-S are the same and yes you will need the RSX-S calipers. The rotors are bigger so the EP3 calipers will not fit plus reusing your EP3 calipers kind of defeats the whole purpose of doing the conversion.

  7. #52
    Jezzika Rabbit! SkareKrow's Avatar
    Join Date
    Apr 2008
    Location
    Riverside, California, United States
    Posts
    1,013

    Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts

    Quote Originally Posted by poeticfinesse21 View Post
    All 02-04 RSX-S are the same and yes you will need the RSX-S calipers. The rotors are bigger so the EP3 calipers will not fit plus reusing your EP3 calipers kind of defeats the whole purpose of doing the conversion.
    Yes and No!


    You can use the ep3 calipers in the rear! The front you need the Type S Calipers! And axles as well from a type S!

    Sent from my SPH-L710 using Tapatalk 2

  8. #53
    Registered User
    Join Date
    Feb 2013
    Location
    washington dc
    Posts
    37
    Thanks guys.

  9. #54
    Jezzika Rabbit! SkareKrow's Avatar
    Join Date
    Apr 2008
    Location
    Riverside, California, United States
    Posts
    1,013

    Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts

    Quote Originally Posted by dreman View Post
    Thanks guys.
    Yup anytime, Let us know if you need any help at all. You can pm me or email,
    SkareKrowZ@gmail.com



    Sent from my SPH-L710 using Tapatalk 2

  10. #55
    that guy w/ the face poeticfinesse21's Avatar
    Join Date
    May 2010
    Location
    Chicago
    Posts
    493
    Quote Originally Posted by SkareKrow View Post
    Yes and No!


    You can use the ep3 calipers in the rear! The front you need the Type S Calipers! And axles as well from a type S!

    Sent from my SPH-L710 using Tapatalk 2
    Yea you're right Jaime. I just assumed that he was talking about the front. All 02-05 EP3's and 02-06 RSX have the same rear calipers.

  11. #56
    Registered User
    Join Date
    Feb 2013
    Location
    washington dc
    Posts
    37
    Very help guys and thanks.

    SkareKrow good looking out I just pulled a full setup off a 04 TYPE-S just now boy I'm tired and hurting. I'll do the swap in a few weeks I'm impressed with this site you've all been so helpful.
    Last edited by dreman; 03-27-2013 at 05:35 AM.

  12. #57
    Jezzika Rabbit! SkareKrow's Avatar
    Join Date
    Apr 2008
    Location
    Riverside, California, United States
    Posts
    1,013

    Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts

    Quote Originally Posted by dreman View Post
    Very help guys and thanks.

    SkareKrow good looking out I just pulled a full setup off a 04 TYPE-S just know boy I'm tired and hurting. I'll do the swap in a few weeks I'm impressed with this site you've all been so helpful.
    let me know if you need anymore help. if you were local we could do your conversion asap!=)

    Sent from my SPH-L710 using Tapatalk 2

  13. #58
    Registered User
    Join Date
    Feb 2013
    Location
    washington dc
    Posts
    37
    I have 1 more question I noticed the rear ABS senors are no good so I need to get these asap.

    After looking at honda/acura part numbers it looks like the 02-03 EP3 shares the same rear ABS sensors as 02-04 RSX Type-S

    So just to confirm I can reuse the EP3 rear sensors on the RSX knuckles which will avoid lights on the dash for abs and work out?

    Thanks in advance.

  14. #59
    that guy w/ the face poeticfinesse21's Avatar
    Join Date
    May 2010
    Location
    Chicago
    Posts
    493
    I don't see why not. The rears are identical aside from the extra lug

  15. #60
    Jezzika Rabbit! SkareKrow's Avatar
    Join Date
    Apr 2008
    Location
    Riverside, California, United States
    Posts
    1,013

    Re: DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts

    Quote Originally Posted by dreman View Post
    I have 1 more question I noticed the rear ABS senors are no good so I need to get these asap.

    After looking at honda/acura part numbers it looks like the 02-03 EP3 shares the same rear ABS sensors as 02-04 RSX Type-S

    So just to confirm I can reuse the EP3 rear sensors on the RSX knuckles which will avoid lights on the dash for abs and work out?

    Thanks in advance.
    you can reuse the ep3 ones just fine!

    Sent from my SPH-L710 using Tapatalk 2

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •