k24/20 swap

[K24/20monsta]

what would be the best k24 block and k20 head swap.......i want to make all motor without turbo, so what would be the best combo?

[1SalientEp3]

just do a k24a2 swap

[zdiddy22]

you would proably want to go with a K24A2 since it has the highest compression ratio, plus hp. and the internals are very strong.

[heyvortek]

k24a1 from the crv. u can jus do the straight k24a2 as zdiddy said. cant go wrong with neither. jus gotta find a cal to run on with the k24a1/k20a2 combo.

[yyi]

you would proably want to go with a K24A2 since it has the highest compression ratio, plus hp. and the internals are very strong.

this.

the k24a2 internals are by far the best of the k24's, the best head is probably the k20z1 since it has the closest cams to the type-r. but if you can get a complete k24a2 just leave it as is, it is very good as is.

[Deadphishy]

k24a2 is your best bet.

unless your short on time/cash then just do a k24a1, and build it later on. Someone just posted a street tuned k24a1 that made 180whp and 160 Wtq thats pretty decent. add some cams to that and your talking over 200whp

[K24/20monsta]

you would just do all k24a1 and not a k20 head?

[yyi]

thats fine, but mostly people want the vtec head from the type-s/tsx/06+si because of the 3lobe cam setup. you can make more power and retain good economy as well with those heads.

[K24/20monsta]

so what do u think would be the best combo or just straight engine to have?

[K24/20monsta]

Am i goin to need to change engine mounts? could i put my skunk 2 cams and intake manifold from my k20 into the k24?

[EP3driver]

Anyone knows other places to get full swaps other than hmotors?

[K24/20monsta]

would i need to do anything to my block or car to get it to fit? so ur saying with the k24a2 block.....put a k20z3 head on it? what size gasket would work for the combo and what would i need to do with my ecu?

[spartan]

what would be the best k24 block and k20 head swap.......i want to make all motor without turbo, so what would be the best combo?

doesn't really matter if ur gonna build the internals any k24 block will do an any k20a, a2, or z1 head will do fine.. Im doin the same build. Kpro is the most important part..

[PAPITUYO326]

Anyone knows other places to get full swaps other than hmotors?

Check the Vendor section ;)

1300 shipped for a k24a1 swap
2850 shipped for a 05+ TSX Swap
2750 shipped for an 04-06 TSX Swap

[jdm805]

I believe I gonna do this swap here soon in a a month i've gotta a k24A2 block just waitin for some money to come in then gonna buy the Z1 head . its gonna be nice .