Close

Page 3 of 5 FirstFirst 12345 LastLast
Results 31 to 45 of 73

Thread: Kraftwerks SC

  1. #31
    Registered User Goodsnacks's Avatar
    Join Date
    Apr 2008
    Location
    Canada
    Posts
    23
    I would say go with a half rad to get the extra room on the intake side.. There still needs to be room for the BOV in that spot.

  2. #32
    Registered User lordofthesiths's Avatar
    Join Date
    Apr 2008
    Location
    Tulsa, OK
    Posts
    246
    I'd love to get the TTS kit myself.
    Don't know why Kraftwerks doesn't make the kit the same way as TTS, with thw SC on top with an extended pully and cutome intake manifold.

  3. #33
    ephatch member SandBagger's Avatar
    Join Date
    Nov 2010
    Location
    hampton
    Posts
    110
    I want this set up in my EG. Built bottomed and typeR 11.7 pistons. Shit will do it.

  4. #34
    Site Sponsor 72chevel's Avatar
    Join Date
    Apr 2008
    Location
    MN
    Posts
    161
    http://cgi.ebay.com/ebaymotors/HONDA...s#ht_500wt_749

    check out the tts kit for the ep3!!!
    Last edited by 72chevel; 11-06-2010 at 03:59 PM.

  5. #35
    that ain't rootbeer! skoolnu's Avatar
    Join Date
    Apr 2008
    Location
    Clay, New York, United States
    Posts
    324
    yup, its time to ditch the jackson.

  6. #36
    ephatch member SandBagger's Avatar
    Join Date
    Nov 2010
    Location
    hampton
    Posts
    110
    Along with the pulley position of thte charger, a oil cooler, a intercooler, and the fact that I can make around 360ish with a small amount of boost....hell yeah

  7. #37
    Registered User Go_ep3's Avatar
    Join Date
    Apr 2008
    Location
    NorCal209
    Posts
    132
    Quote Originally Posted by 72chevel View Post
    http://cgi.ebay.com/ebaymotors/HONDA...s#ht_500wt_749

    check out the tts kit for the ep3!!!
    HHmmm, how much whp will this thing make on a k24a2, any1 know?

  8. #38
    Site Sponsor 72chevel's Avatar
    Join Date
    Apr 2008
    Location
    MN
    Posts
    161
    http://www.tts-performance.com/catal...age2aircon.pdf

    Check this out on there website they have a few different options but this one look close they also have a stage 3 here:

    http://www.tts-performance.com/catal...yperstage3.pdf

    My dream would be use this on the top and use a lower one where the Air compressor is

  9. #39
    Registered User Jharobikesr2's Avatar
    Join Date
    Jul 2010
    Location
    Denever CO
    Posts
    90
    Here comes the new wave of supercharged ep's hahaha. Crazy setup! Love the fact of the inter-cooler.

  10. #40
    Registered User Go_ep3's Avatar
    Join Date
    Apr 2008
    Location
    NorCal209
    Posts
    132
    Quote Originally Posted by 72chevel View Post
    http://www.tts-performance.com/catal...age2aircon.pdf

    Check this out on there website they have a few different options but this one look close they also have a stage 3 here:

    http://www.tts-performance.com/catal...yperstage3.pdf

    My dream would be use this on the top and use a lower one where the Air compressor is
    thanks for the info... do it, make it come true. lol twin sc ftw

  11. #41
    Registered User Goodsnacks's Avatar
    Join Date
    Apr 2008
    Location
    Canada
    Posts
    23
    Quote Originally Posted by 72chevel View Post
    http://www.tts-performance.com/catal...age2aircon.pdf

    Check this out on there website they have a few different options but this one look close they also have a stage 3 here:

    http://www.tts-performance.com/catal...yperstage3.pdf

    My dream would be use this on the top and use a lower one where the Air compressor is
    That's what they did to break the landspeed record for front wheel drive... I think it was an RSX they used.

  12. #42
    NerfHerder heyvortek's Avatar
    Join Date
    Apr 2008
    Location
    Orlando, FL
    Posts
    379
    lets see this run a turbo ep. would be a nice lil battle :)

  13. #43
    Site Sponsor 72chevel's Avatar
    Join Date
    Apr 2008
    Location
    MN
    Posts
    161
    I suppose once you get over 3-400 whp it just becomes a tire smoke contest...

  14. #44
    noun; /Jew-stin/ j0000stin's Avatar
    Join Date
    Apr 2008
    Location
    GOLDEN STATE
    Posts
    1,467
    Quote Originally Posted by Jiyakku2 View Post
    The TTS Kit for the EP3 does make great power and does allow for the retention of the factory A/C but keep in mind two things:

    1) That kit was specifically designed for the UKDM Civic Type R (K20A2), USDM K20A3 owners will NOT see the same numbers advertised.

    2) You will pay a premium for it.

    List price for the base Stage 1 is 2500 GB = $3625 US Dollars, Stage 2 + 3 Kits list for 3500 GB = $5,075 US Dollars

    AND you still have to provide your own K-Pro (about $1000 US)

    AND you still have to get it tuned ($300 +)



    Just like Kraftwerks is the official US Distributor for Rotrex in terms of Import Car Applications, TTS is the UK Distributor. Going further Power Enterprise is the JDM Distributor for Rotrex. Check out the official Rotrex site and their list of aftermarket car applications: http://www.rotrex.com/Home/Superchar...Kits_Cars.aspx .
    damn for that price id rather get a k24a1 swap and turbo it ;/

  15. #45
    Registered User 03Si757's Avatar
    Join Date
    Apr 2008
    Location
    Newport News, Virginia, United States
    Posts
    1,103
    Im sold on the TTS Kit. Ima look into the stage 2 for my k24a1/a2 build...

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •