Close

Results 1 to 11 of 11
  1. #1
    ephatch member
    Join Date
    May 2008
    Location
    Woodstock Georgia
    Posts
    89

    Warped...everything. Recommendations for plain jane brake rotors

    I dont need anything special - I dont know what I have done to my car but the front and rear rotors are warped so bad that they cant be turned.

    I have some hawk pads which I really do like, so I plan to get more of those but as far as rotors what do you recommend and where should I go about getting them? Brembo (not slotted or cross drilled) or just some from honda?

    Thanks..

  2. #2
    Registered User
    Join Date
    Apr 2008
    Location
    Atlanta, GA
    Posts
    82
    the brembo blanks are cheap. i would just get those

  3. #3
    ephatch member
    Join Date
    May 2008
    Location
    Woodstock Georgia
    Posts
    89
    Is there a better place to get them? I havent really bought anything for my car in years until a month ago... I have to stop neglecting it :)

  4. #4
    广州本田
    Join Date
    Apr 2008
    Location
    NorCal, 中山/香港.
    Posts
    1,167
    Whatever blank rotors you can get, autozone, kragen, oem.. etc. or you can pay more for a better brand of your choice. All rotors are pretty much the same thing, they look the same, they perform the same. Slotted and drilled are waste of money.

    http://www.ephatch.com/forum/showthr...-rotor-options

  5. #5
    ephatch member
    Join Date
    May 2008
    Location
    Woodstock Georgia
    Posts
    89
    Looking at buying some blanks online but which rears should I get? Do 01-05 civic rear brake rotors work for the 03 si?

    Also where can I get a rebuild kit for my calipers? I figure I should take care of that too while I am in there.

  6. #6
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    LOL, brake rotors DO NOT WARP. But they do wear in a uneven pattern do to stuck sliders and uneven pad buildup. But at no time does the Iron in the rotor get hot enough to allow any type of warpage(unless they get beyond red hot, and our brakes can not produce such heat)

    AutoZone blanks work perfectly!
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  7. #7
    ephatch member
    Join Date
    May 2008
    Location
    Woodstock Georgia
    Posts
    89
    Well whatever it is, there is violent pulsating action going on when I brake :P

    Does autozone also sell the rebuild kits?

  8. #8
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    They should have what you need to get the brakes working correctly again, make sure the calipers are not hanging up on the pin's.
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  9. #9
    Bonnie...real OG RedSiBaron's Avatar
    Join Date
    Dec 2006
    Location
    Cincinnati
    Posts
    4,430
    Quote Originally Posted by Blindeye_03 View Post
    Well whatever it is, there is violent pulsating action going on when I brake :P

    Does autozone also sell the rebuild kits?
    buy the oem honda rebuild kit

    and if you are buying disks, though as talon said, you cant warp disks, i would buy brembo blanks
    my ep is white...

    - We can talk numbers all you want, but the bullshit stops when the flag drops...

  10. #10
    ephatch member
    Join Date
    May 2008
    Location
    Woodstock Georgia
    Posts
    89
    Quote Originally Posted by RedSiBaron View Post
    i would buy brembo blanks
    Where would you recommend? And I hate that I keep asking everything twice - but are the rears on a 03 ep3 the same as the "01-05 civic"?

  11. #11
    Site Sponsor oneglory's Avatar
    Join Date
    Apr 2004
    Location
    NJ
    Posts
    1,470
    i got a good set of Centric rotors from rockauto. they were like $28/ea or something.
    Ed~

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •