Close

Results 1 to 10 of 10
  1. #1
    Registered User KaeDu's Avatar
    Join Date
    May 2008
    Location
    Wisco
    Posts
    152

    Progress rear sway combo

    Alright so after some searching I am still confused, The Progress rear sway combo(bar and reinforcement brace), CURRENTLY is a 22m or 24mm solid or hollow bar? Also, if it is a 24mm bar where can it be found. On progress's website they say 22mm. Any and all information would be greatly appreciated.

  2. #2
    Falcon Punch LouisianaEP3's Avatar
    Join Date
    Aug 2009
    Location
    Baton Rouge
    Posts
    265

  3. #3
    Registered User KaeDu's Avatar
    Join Date
    May 2008
    Location
    Wisco
    Posts
    152
    Does this mean that there isn't a 24mm? I think I may have heard that it was a 24mm for RSX that fits for our EP3's but I am not sure. If so does this require different end links?

  4. #4
    Registered User BeaterEP's Avatar
    Join Date
    Apr 2008
    Location
    Georgetown, TX
    Posts
    1,457
    There is a 24mm, solid, comes as an adjustable mount (two holes for connection to the endlink, so you can attach it in a slightly wider position).
    PN# 62.0103

    Now here's the thing, I'm rockin the Progress 24mm, PN# 62.0103, and it's not a two-hole configuration. Single mount point only.
    But, they are available. Pricey, but available.

  5. #5
    Registered User KaeDu's Avatar
    Join Date
    May 2008
    Location
    Wisco
    Posts
    152
    Who do I contact for the 24mm and what is the pro/con of the wider hole? Will the RSX endlinks that come with the bar work in my car also? Price=how much?

  6. #6
    Registered User KaeDu's Avatar
    Join Date
    May 2008
    Location
    Wisco
    Posts
    152
    Bump! Help!!

  7. #7
    Newbie Post Whoring T_Virus's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento
    Posts
    3,207
    becareful because i remember lots of people problems with the progress rear sway bar with aftermarket exhaust but i don't remember which one was it, 22mm or 24mm...

  8. #8
    ephatch member
    Join Date
    Apr 2008
    Location
    Vancouver
    Posts
    347
    I am quite positive that the 24mm bar has always been two position adjustable. If you only got the single hole, then it's the 22mm bar.

  9. #9
    Registered User BeaterEP's Avatar
    Join Date
    Apr 2008
    Location
    Georgetown, TX
    Posts
    1,457
    That's odd...came in a box with the 24mm part number.
    Used, so maybe just showed up in the wrong box lol...I'm happy with it either way!

  10. #10
    Registered User KaeDu's Avatar
    Join Date
    May 2008
    Location
    Wisco
    Posts
    152
    Alright. So if I am looking for nice neutral steering setup on HFP suspension with 17x8 Kuroki F91 with Yokohama S. Drives would I want the 24?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •