hmmm interesting...i just installed a v2 for my buddy and they seem to all have came out pretty easily. i used a ratchet and an extension and kept turning till it came out.
I feel dumb asking this question. But I was bored today and wanted to do the Hondata airbox mod. But the problem is I could'nt get at the one "bronze" bolt on the right??
I had know room to get in there and get it loose!
I realize how it comes out....but just can't seem to get to that bolt. If anyone can help that would be great.
ThanksT
hmmm interesting...i just installed a v2 for my buddy and they seem to all have came out pretty easily. i used a ratchet and an extension and kept turning till it came out.
extension and a U-joint socket > bolt
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
Yeah...I did'nt have a u-joint socket kicking around.
I could'nt get in there with my rachet extension either. Its not like I'm a noob, I've built a ton of engines. But this is my first K engine, everything is so squeezed in there.
I definetly will give it another go on Wednesday when I have another day off.
U-joint has saved my life many times. one of the best investments ever.
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
yea my buddy loves his haha he says its super loud
This is what you need to do......
DIY Mugen/Comptech/FG2 Airbox for Ep3
A much better recommendation IMO is to get a new FA or FG airbox and mod do a Hondata airbox mod on it. All you'll have to do is figure out a way to get it to bolt down somehow and you have a Comptech/Mugen airbox at a fraction of the price. Plus its ALOT smaller than our huge horrible flowing airbox.
^I think this is the item # for the K&N filter -> 33-2343.
Remember this is in theory. But, I'm willing to bet you can get a stock airbox DIRT cheap and try it out. So go for it DIY guys.
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
try praying...
sledgehammer, sawzaw and blowtorch i find are better than praying to get the airbox out
zombie thread FYI
EDIT: WTF!?!?! i made this post and instantly it said "Last edited by 20CiviC02si;09-23-2008 at 8:59 AM" at the bottom of my post...JAKE!! STOP GOING INTO MY THREAD IN THE FUTURE WHILE IN THE PAST TO EDIT IT!!! FUCK!
Last edited by RedSiBaron; 04-06-2010 at 06:08 PM.
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
OK... I'm a serious n00b and have searched the internet for at least a walk through of how to take out the stock airbox to install my sri. Anyone know of a good pictured tutorial?
all you need is a screw drivers and a 10mm socket wrench. it pretty much comes down to just unscrewing stuff til it comes out.
here's a link to a set of instructions to install an aem v2. the first couple of pages deal with uninstalling the stock box
http://www.aemintakes.com/instructio...-6108_inst.pdf
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks