Close

Results 1 to 8 of 8
  1. #1
    Drift Away... Distance's Avatar
    Join Date
    Apr 2008
    Location
    Anaheim,CA
    Posts
    530

    megan track series coilovers

    hey guys i recently bought a set of megans track series coilovers for the rsx-s. during installation i ran into a problem with the rears not wanting to bolt up at the bottom area. it seems that the green area that is squared in the picture seems a little to big for our cars. any ideas on what to do?



    picture for references.

  2. #2
    Drift Away... Distance's Avatar
    Join Date
    Apr 2008
    Location
    Anaheim,CA
    Posts
    530
    anyone?

  3. #3
    Registered User Andrew's Avatar
    Join Date
    Jul 2008
    Location
    East Bay
    Posts
    791
    you might have to shave down the part where it bolts up i think that's what some have done to get dc5 spec coilovers on the ep3

  4. #4
    ephatch member qnzjay69's Avatar
    Join Date
    Feb 2009
    Location
    queenz/si New york!
    Posts
    119
    there made for the rsx type s, the rsx rear lca had a bigger opening for the shock then we do, u have to either shave down or by rsx type s rear lca, its better to just purchase the rear ones because if u ever part out or want to go back to stock u can just swap lcas.... good luck hope this help

  5. #5
    Heading for 600rwhp! BlownSi05's Avatar
    Join Date
    Jan 2005
    Location
    Saint Simon's Island, GA
    Posts
    1,631
    Quote Originally Posted by Andrew View Post
    you might have to shave down the part where it bolts up i think that's what some have done to get dc5 spec coilovers on the ep3
    ^^ that......And did you get a set of RSX-S tie rod ends?

  6. #6
    Drift Away... Distance's Avatar
    Join Date
    Apr 2008
    Location
    Anaheim,CA
    Posts
    530
    Quote Originally Posted by BlownSi05 View Post
    ^^ that......And did you get a set of RSX-S tie rod ends?
    yes i do have a set of rsx-s tie rods. my old suspension set up were dc5 tein ss. they bolted up fine without modifiying it. only thing i needed was the rsx-s tie rods.

  7. #7
    Star Specs fanboy... socmex7's Avatar
    Join Date
    Aug 2007
    Location
    Glendale, CA
    Posts
    1,396
    Quote Originally Posted by qnzjay69 View Post
    there made for the rsx type s, the rsx rear lca had a bigger opening for the shock then we do, u have to either shave down or by rsx type s rear lca, its better to just purchase the rear ones because if u ever part out or want to go back to stock u can just swap lcas.... good luck hope this help
    this. they're not too expensive and are fairly easy to install

  8. #8
    Drift Away... Distance's Avatar
    Join Date
    Apr 2008
    Location
    Anaheim,CA
    Posts
    530
    Quote Originally Posted by socmex7 View Post
    this. they're not too expensive and are fairly easy to install
    hmm.. im prob just better selling these coilovers.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •