k20/k24

[Deadphishy]

Give us some time, before you pay someone who has never seen Kmanager before look at it and scratch his head for a few hours.

[Jrw]

thanks to both of you i will load this map tomorrow around 2pm when im with the car and i will let you know what the deal is. I really appriciate it i have too much money in this pit to give up on her!!

[goldEp]

wow..great thread...!im looking forward for a reply from the pros.i will remember all this.im doing my swap soon.

[02nhbpep3]

thanks to both of you i will load this map tomorrow around 2pm when im with the car and i will let you know what the deal is. I really appriciate it i have too much money in this pit to give up on her!!

Anytime! EPHatch is definitely the best forum I have ever come across for actual helpful information compared to CRSX and H-tech which are both a joke.

[Deadphishy]

Yup, waiting to hear any updates on this.

[Jrw]

i assume my battery is dead when i try to start it my dash lights click rapidly im going to charge it and try again.

[Deadphishy]

The clicking and the lights flashing is because your battery is dead. Your going to need to charge it up, or barrow a jumper box from someone.

MAke sure your laptop has version 1.4 of kmanager. Then turn off your computer. Restart kmanager and try uploading the .Kal Sometimes the upload doesn't work and the car wont start because the map is messed up.

The speedo problem is a ground problem. Happened to me after i did my swap. When things got real hot, the speedo would work all funny, then just stop. So i put an extra ground cable from the Neg terminal on my battery to a transmission bolt. Speedo problem went away.

Let me know what you get.
And you still need to tell me what kpro says your check engine light is. That is the Tab all the way to the right. "error codes"

What this guy said last night

[Jrw]

so i loaded the map and it sounds like it wants to start and then just sputters out. so i have a new 02 4bar map and 440cc injectors, would any of that matter or should it still start? no error codes. there is a place here near me thats telling me to check fuses, does that even sound like it could be possible? and yes you are the reason i had that assumption. the battery is only four days old. (and yet another problem).

[Deadphishy]

Hondata 4bar map? that will cause a problem........ You need to go into the .kal and click parameters, then click on Map, Then uncheck the Stock Map sensor box, and select Hondata 4 bar Map sensor. That might do it.

Battery died from cranking the motor so much. It takes a ton of power to start a car. And if the car isn't running to recharge the battery then it will die very quickly.

[Deadphishy]

Well? anything.

quick check for the Map sensor is to just unplug it.

[Jrw]

had the battery charging overnight going to test it today when i get home.

[Jrw]

what are the chances my timing jumped?

[02nhbpep3]

Slim to none

[Jrw]

damn thing still wont start battery has full charge change the map to my omni 4 bar and even unplugged it. it will crank up and die right away. when this things starts you will see tears of joy!

[Jrw]

i have someone coming to help me tomorrow after we figure it out i was post the solution. im sure you guys have already had the solution i just didnt do something right.