Will Larger Wastegate Help Boost Creep on Peakboost Manifold?

[groovezog]

I know a lot of Peakboost kits ship with a 44mm TiAL wastegate. I just picked up a Peakboost manifold/downpipe/test pipe setup, and I am about to purchase a new wastegate, as the current wastegate from my RevHard manifold has a different flange.
My turbo compressor side is pretty big, and I'm shooting for 20-25psi. I'm currently using the Mac valve boost control solenoid.
Will I experience boost creep at this level? Should I use a 44mm or 60mm wastegate? What are the pros and cons of each size?

[Guardian]

You will need to have a new port and flange welded on the manifold to run the 60. Also a new dump tube.
If you have a good tuner you won't have creep with the 44.

[gtimportfanatic]

yep.. its all on the tuner..

[groovezog]

You will need to have a new port and flange welded on the manifold to run the 60. Also a new dump tube.
If you have a good tuner you won't have creep with the 44.

yep.. its all on the tuner..

Great to know. Thanks to you two for sharing your input.
Keep your eye out for phase 2 of my turbo endeavor.