Wow that sucks.
I know nothing about swapping the trans from the Z3 into the EP chassis, but I don't see why it wouldn't work.
They can't make it work either?
ok i finally took my ep 2 the shop to get the tranny put on, and they said it wont work. :( i bought the hybrid racing vss converter, bcss, new clutch and the dam tranny. the shop is tellin me that my shifting cables are different. he thinks i need 2 use the 1s out the 06+ si. has any 1 had this problem??? plz help i need my car back.
Wow that sucks.
I know nothing about swapping the trans from the Z3 into the EP chassis, but I don't see why it wouldn't work.
They can't make it work either?
This is an easy fix
The shifter is reversed on the 06+ si's What you have to do it this. You have to remove the Z3 shift mechinism, and put the on from your Ep on it. all of the bolt holes will not line up correct, atleast two will. You will need to drill and tap a new whole for the third.
No big deal, i'll get you to a post that explains this in more detail.
You can't use the cables. THE BCSS is required, or you have to mod your stock shifter. So don't worry about that.
It's a pretty streght forward switch. Take old one off, new one goes on. Tap 3rd bolt hole, and your set. good luck
http://www.k20a.org/forum/showthread.php?t=40933
here you go. take the cable back. Save the money, tell the shop google is the best.
Last edited by Deadphishy; 04-29-2010 at 03:05 PM. Reason: I wrote manifold, when i ment to say shifter....
i tryed tell them about what u toldme , theykeep tellin me that, it wont work and that they wanna try the cables because of the differance in length. and he keeps askin me(y wont the cables work y wont they wok) so im hopein he can get them 2 work some how, cuz i really cant keep spending money on usless things.
Damn bro sorry to hear about this , I had no idea. I found a thread on K20a.org might be a repost but hear you go.
http://www.k20a.org/forum/showthread...ghlight=miaep3
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
damn, and cables arn't keep either. Tell them to take those things back. I hate it when shops just try to toss every possoble dollar they can at a problem. If you would like post up their number, Either I or Talon can give them a call and explain to them what the problem is.
ok sooooo he put the new cables in and the shifter is all backwards, sooo now he said he wont charge me 4 the cables and he will try the shifter mechanism cuz i showed him pics and he thinks he gets it now. sooo i hope everything goes welll
finnnaallllllyyyyy it worksss!!!!!!!!!!!! he had a rsx there from another costumer ,and he took it out his car because the ep3 1 didnt work. but it works fine now . so i keeped his and im buyin him a new 1 lol but now we know 4 sure u need the parts of a type s with the ep3 cables[QUOTE=Deadphishy;747740][/QUOTE
[QUOTE=popsep3;747916]finnnaallllllyyyyy it worksss!!!!!!!!!!!! he had a rsx there from another costumer ,and he took it out his car because the ep3 1 didnt work. but it works fine now . so i keeped his and im buyin him a new 1 lol but now we know 4 sure u need the parts of a type s with the ep3 cablesso for clarification the shop guy used a rsx-s shifter mechanism and ep3 shifter cables with the z3 tranny and it bolted up perfectly fine?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks