if your talking about my box for the front peice I cut the outside with a bandsaw. cut the inside with a jig saw and used a router bit to cut the opening for the speaker itself. I used dowel rods and fiberglass to hold it in place until I streched the front over it and glassed it in place permenatly. Also there is no way I personally would ever do this for $60. Ive got more than that just in the materials that went into it not to mention how much of my time it took to make it. Plus after that project I determined that I really hate fiberglass and wouldnt touch the stuff for anyone besides myself :)
Bookmarks