It depends alot on your suspension mods. But if you are dropped about 1.5" or more, the RCA will really become more essential.
which one should i get? the roll center adjusters seem alot easier than the stteering bracket even though they cost a litttle more.
It depends alot on your suspension mods. But if you are dropped about 1.5" or more, the RCA will really become more essential.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
im dropped on progress springs right now but i just bought a set of sk2 pro-s coilovers and omni power rear lcas. i have a rear camber kit and a set of front cam bolts not in yet and a 21mm type s rear sway and es sway bushings.im probly gna drop to 2 inches in front and 1.8 in front just enough to close the rest of the 1finger gap from the progress. im also plannin on road racing and autox more to.. so i should sell my bracket and pic up some rcas?
I bought the bracket last week. It cost less, is gonna take a bit more work to put in, but it also wont ware out like the RCAs will
dosent these two things serve two diffrent purposes?
correcting steering arm angle v.s correcting roll center.
yea,but i figure if i get the spherical ones theyll last longer and help more with handling.
I thought the RCA's made the greatest impact on handling.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
http://www.corsportusa.com/store/cat...oducts_id=6016 isnt this the same thing as the RCA? i swear i saw a pic of the hardrace rca and i coulda swore this was the same thing.
i just looked at the j's racing RCA and it looks exactly like the extended ball joint from buddy club. these are supposed to find the angle of the tierod ends just like the bracket right?
thats what i thought too. I thought they correct the geometry on the front suspension for lowered cars. Ie correct the tie rod angle.
yea.. idk. i suppose they both do the same thing. i think i may just opt for the RCA's since theyre alot easier. even tho i have a shop that can put the bracket on. i dont really wanna fuck with the tierods on the inside. and fuck up my alignment. cus my car drives staight as an arrow even with some neg camber in the rear.
The extended ball joint(roll center adjusters) does not correct your tie rod's angle. The ball joint and the tie rod bracket serve two different purpose. The ball joint will help correct your front suspension's roll center, and the bracket will correct the tie rod's angle and they do only just that. If you want to have both you will need to buy both. Since you are not lowered to the floor i would tell you to opt for the roll center adjusters since they will be a lot more beneficial to you.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks