Close

Results 1 to 8 of 8
  1. #1
    Site Sponsor 02EP3SI's Avatar
    Join Date
    Apr 2004
    Location
    Cincinnati
    Posts
    451

    02ep3si New motor build

    Well got my new motor built.. It turned out pretty good. i was figuring pretty close to my old numbers of 253whp 191tq

    Ended with 273whp 211tq tuned on the exact same dyno... Old and new numbers are shown here.


  2. #2
    ephatch member
    Join Date
    Apr 2008
    Location
    Chicago Area
    Posts
    1,240
    what was all changed? It wasn't just the header was it?

  3. #3
    Site Sponsor 02EP3SI's Avatar
    Join Date
    Apr 2004
    Location
    Cincinnati
    Posts
    451
    no... he kept all my info from my last tune on there..

    Same compression but i had to bore it out to 87.5mm other then that and the header it was all the same.

  4. #4
    Registered User Kerby's Avatar
    Join Date
    Mar 2007
    Location
    CT
    Posts
    1,691
    wow. that stage 2 cam is for NA setup?
    i like that you pretty much gained everywhere!

    imagine what it would do with the 2.65 kit and a Endyn massaged head.

  5. #5
    official SillyWanker yyi's Avatar
    Join Date
    Jul 2008
    Location
    local bus station
    Posts
    717
    wow great numbers!!! glad to see you never gave up, lets hope the tensioner doesnt take a poop again.

  6. #6
    Site Sponsor 02EP3SI's Avatar
    Join Date
    Apr 2004
    Location
    Cincinnati
    Posts
    451
    Quote Originally Posted by Kerby View Post
    wow. that stage 2 cam is for NA setup?
    i like that you pretty much gained everywhere!

    imagine what it would do with the 2.65 kit and a Endyn massaged head.
    well, my head is blue print ported and polished.. I guess that helps a bit. And yeah they are the stage 2 brian crower n/a cams. very good cam in my opinion.

    This was tuned on 93 pump gas also..

    Quote Originally Posted by yyi View Post
    wow great numbers!!! glad to see you never gave up, lets hope the tensioner doesnt take a poop again.

    driving with a stock k24a4 in my car with k pro is what made me have to do it again.. It was pointless to have the technology going to waste.. lol

  7. #7
    2 lobes yo nightrider2002's Avatar
    Join Date
    Apr 2008
    Location
    Ohio
    Posts
    124
    Nice power curve! Looks like the new header helped quite a bit. Did the kid racing header clear the front sway alright with the K24?

  8. #8
    k24 ep3 bchaney's Avatar
    Join Date
    Apr 2008
    Location
    tx
    Posts
    784
    Damn, not bad for 0.5mm bore and a new header. What was your old header? And you switched to the kiddracing one?

    What's your build setup? I couldn't find it in your old threads.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •