Wheel spacers

[madhatter2213]

hey guys.....i just had a quick question regarding my wheels and fitment and all that good stuff. Im thinking about flushing out my car and making at least the rear fit clean and flush and sit a little bit cambered.....anyways, im riding 17x7 CTR's all around and i was just wondering what your suggestions would me on wheel spacer for the rear.like what sizes you guys have went with or what you think would fit best

any suggestions would be greatly appreciated.

thanks again guys

[RHCP0801]

on my hfp wheels i have 15mm in the front and 5 in the rear and it looks perfect

[madhatter2213]

you have bigger spacers in the front than in the rear? is this because the front is closer to the inside to begin with?

[RHCP0801]

yea, i had the bigger ones in the rear and i needed a whole lot of neg camber...5mm in the rear is perfect

[madhatter2213]

well im trying to mess with that hellaflush look so i think some negative camber sounds pretty appealing

if anything, i could buy the same 15mm-5mm combo and try it both ways

yea...?

[sLiCk]

Keep in mind anything more than a 5mm spacer will require longer studs. Just thought I'd throw that out there.

[RHCP0801]

unless you get the spacers that have the studs built in like i did

and yea you can switch them back to front to see what you like, i think i might have an extra set of h&r 5mm wheel spacers if you want them

[RoyVegasPinoy]

unless you get the spacers that have the studs built in like i did

and yea you can switch them back to front to see what you like, i think i might have an extra set of h&r 5mm wheel spacers if you want them

I might want them! if the OP isn't interested, that is.. Any pics of your setup?

[RHCP0801]

alright well i guess i will wait for his response

most recent pics are from almost a year ago but im gonna be going on a photoshoot this weekend and making a members rides sometime next week so ill post it than and let you know

[RoyVegasPinoy]

Sounds good. btw, where'd you get the H&R spacers? I'm looking to get 15mm for the front too.

[RHCP0801]

showstoppers is where i got the 5mm ones, i called them to order.....evasive motorsports is where i got the 15mm ones, project kics because they have the lugs in the spacers so no need for extended studs. You need to buy the hubcentric ring seperate so they cost a good amount but worth it

[madhatter2213]

i forgot to mention, i did a 5-lug conversion on my car. So i have the lug setup off an RSX, 04 i believe

im not sure if that would make a difference, or if those H&R 5mm you have would fit

lmk tho

[RHCP0801]

no its the same

[ep3jd]

on my hfp wheels i have 15mm in the front and 5 in the rear and it looks perfect

he's telling the truth. lol

[madhatter2213]

how much would you want for the 5mm's?