Close

Page 1 of 5 123 ... LastLast
Results 1 to 15 of 65
  1. #1
    PaNdA PoWeR 27rocks's Avatar
    Join Date
    Apr 2008
    Location
    Santa Cruz Ca.
    Posts
    3,821

    DIY: Volvo Lip (1990-1994 VOLVO 740 N 940)

    DIY Volvo Lip (1990-1994 VOLVO 740 N 940)

    I did this a while ago but it got lost in the crash... I didn't think this would get as popular as it did, but here it is for people that haven't done it yet

    Tools Needed:

    Screw gun
    Screw Driver
    Utility Knife
    Sharpie
    Heat Gun
    3/4" Self Tapping Screws
    Jack and Jack stands
    Volvo Lip




    Step 1: By using the two original holes in the lip center on the bumper and mark with arrows.






    Step 2:

    Cut off all the tabs and cut some slits so the lip will fit flush and bend easier.




    Step 3:

    Use the two original holes in the lip and line it up with your marks. At this point you want to put a screw in each hole.





    Step 4:

    Now that the lip is centered slowly work your way down each side and screw off the lip (I did one side first then the other). Make sure the lip is even along the bumper before you screw it off. Also using a heat gun helps make the lip more flexible and easier to move around. You can use as many screws as you feel necessary.





    Step 5:

    At this point the lip should all be screwed off and on the bumper. By using a sharpie, draw a line to your liking as a guide to cut along. Again using the heat gun here will make the cut go much more smoothly and easier.




    Step 6:

    You are all done and this was a piece of cake. It took me about 45 min all by myself so if you have a friend help it can go a lot faster.




    Last edited by 27rocks; 05-27-2011 at 10:57 PM.


    -Rob

  2. #2
    NO MORE CAR PAYMENTS cronicEP's Avatar
    Join Date
    Dec 2008
    Location
    Hickory, NC
    Posts
    484
    hmmm...i like....just can't find any lips around here...

  3. #3
    ephatch member sirsol66's Avatar
    Join Date
    Apr 2008
    Location
    Michigan
    Posts
    228
    Your car is absolutely gorgeous!

    Do want!

  4. #4
    ephatch member Marc-111's Avatar
    Join Date
    Feb 2004
    Location
    QC
    Posts
    141
    your car looks great on that lip!

  5. #5
    ephatch member EpThreeD's Avatar
    Join Date
    May 2010
    Location
    Ok
    Posts
    227
    Mm. nice diy, Just dont like how its not flush. Nice work though

  6. #6
    ephatch member dschaos's Avatar
    Join Date
    Jun 2009
    Location
    Central Coast, California
    Posts
    120
    i did this before, it only lasted about a month thought, not that it broke its pretty tough but i got tired of scrapping/dragging it over that mountain of a speed bump that they put on my street.

  7. #7
    NC EP Hatch Crew mp_02si's Avatar
    Join Date
    Apr 2008
    Location
    Statesville
    Posts
    336
    I found a lip off of an old celica i thought about trying. The volvo lips are hard to find around here.

  8. #8
    ephatch member ginger's Avatar
    Join Date
    Mar 2009
    Location
    san diego
    Posts
    175
    they do go low on the car. ive had mine on for about 4 months now. set the car off the right way

  9. #9
    Site Sponsor PatrickJamesYu's Avatar
    Join Date
    May 2010
    Location
    Pomona/ Claremont, California
    Posts
    1,235
    For those who have junkyards with zero volvo's

    http://www.car-stuff.com/mmparts/vol...r_valance.html

  10. #10
    ephatch member EP3CHRiS's Avatar
    Join Date
    Feb 2010
    Location
    Toronto, Canada
    Posts
    138
    Quote Originally Posted by PatrickJamesYu View Post
    For those who have junkyards with zero volvo's

    http://www.car-stuff.com/mmparts/vol...r_valance.html

    Thanks a ton! iv'e been trying to find the 740 Lip for 2 months now up here in Canada, but came up with nothing! i was gonna pay 200 bucks just for the bumper to get the lip, but this is awesome! Thanks once again!

  11. #11
    Site Sponsor PatrickJamesYu's Avatar
    Join Date
    May 2010
    Location
    Pomona/ Claremont, California
    Posts
    1,235
    No prob dude!
    All my buddies seem to find 10 volvo lips everytime they go to Pick-A-Part and junkyards around here.
    I go, and it seems like Volvo's are banned haha
    You can also get them off eBay, around 50 US dollars plus another 30 for shipping.
    Maybe see if they can ship to Canada for less than the website I sent you.

    Look up "Lower Valence" instead of "Front Lip"

    Make sure you send a PM of your ride with the lip!
    and post it up here for everyone to see!
    goodluck

  12. #12
    PaNdA PoWeR 27rocks's Avatar
    Join Date
    Apr 2008
    Location
    Santa Cruz Ca.
    Posts
    3,821
    Most recent pics i have of her. Going on over a year with the lip on.







    -Rob

  13. #13
    ephatch member EP3CHRiS's Avatar
    Join Date
    Feb 2010
    Location
    Toronto, Canada
    Posts
    138
    Quote Originally Posted by PatrickJamesYu View Post
    No prob dude!
    All my buddies seem to find 10 volvo lips everytime they go to Pick-A-Part and junkyards around here.
    I go, and it seems like Volvo's are banned haha
    You can also get them off eBay, around 50 US dollars plus another 30 for shipping.
    Maybe see if they can ship to Canada for less than the website I sent you.

    Look up "Lower Valence" instead of "Front Lip"

    Make sure you send a PM of your ride with the lip!
    and post it up here for everyone to see!
    goodluck
    yeah, for sure, ill definitely post up some pics..i was on the site that you posted up and i may have to do a little looking around, (because im up in Canada) but thanks for the tip on the lower valence.

    Quick question for 27Rocks, how hard was it to put the stock 04-05 side skirt on your 02??? any differences?? by the way, looks awesome!!
    Last edited by EP3CHRiS; 07-06-2010 at 07:22 PM.

  14. #14
    Site Sponsor PatrickJamesYu's Avatar
    Join Date
    May 2010
    Location
    Pomona/ Claremont, California
    Posts
    1,235
    try this, they mention a list of places they don't ship, and Canada isn't on the list.
    Email them and ask'em for a shipping quote!
    let me know how that goes.

    http://cgi.ebay.com/ebaymotors/LOWER...ht_2281wt_1164

  15. #15
    ephatch member EP3CHRiS's Avatar
    Join Date
    Feb 2010
    Location
    Toronto, Canada
    Posts
    138
    Quote Originally Posted by PatrickJamesYu View Post
    try this, they mention a list of places they don't ship, and Canada isn't on the list.
    Email them and ask'em for a shipping quote!
    let me know how that goes.

    http://cgi.ebay.com/ebaymotors/LOWER...ht_2281wt_1164

    Thanks for the link, but im not gonna go with Ebay, I know i wont have any problems or anything, but im gonna try the first link you gave me. Hopefully they can ship to Canada.

Page 1 of 5 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •