Close

Results 1 to 10 of 10

Thread: what did i do?!

  1. #1
    Registered User
    Join Date
    Jun 2010
    Location
    757
    Posts
    48

    what did i do?!

    ok so i was goin down the interstate last night and i went to shift down into fourth... well it was a long night and i wasnt exactly focused on driving so i missed 4th, and hit 2nd instead. i was doing about 80. it didnt stay in second for more than a half of a second, and the car rins fine over 2500 rpm now but it runs HORRIBLE at anything lower than that. i havent had a chance to get it on a diagnostics machine yet, but i was wondering if any1 here had any idea what i did to my baby :(

    EDIT: 03 si bone stock inside

  2. #2
    Registered User
    Join Date
    Jun 2010
    Location
    757
    Posts
    48
    UPDATE~ i just put it on the diagnostics machine and it came up with p0301 p0302 p0300, misfire in cylinders 1 and 2 and random misfire, i was reading on some of those forums and they all asked the question, was this caused by an over rev? and none of them could confirm the fact that it was caused by this, mine however im certain thats what did it. anyone have any ideas?

  3. #3
    ephatch member Sub's Avatar
    Join Date
    Apr 2008
    Location
    Edenton, NC
    Posts
    135
    How high did the revs go on the miss shift?
    I'm not sure but you could have bent some values, messed up rockets, or might just have to reset value lash. Not really going to know for sure till you take a look at it.

  4. #4
    Registered User VIZHUNZ02SI's Avatar
    Join Date
    Aug 2003
    Location
    Tampa Palms, FL
    Posts
    742
    im sure the misfire was caused by the over revving and there might be piston to valve contact. reset the ecu and get a valve adjustment.

  5. #5
    Registered User
    Join Date
    Jun 2010
    Location
    757
    Posts
    48
    Quote Originally Posted by Sub View Post
    How high did the revs go on the miss shift?
    I'm not sure but you could have bent some values, messed up rockets, or might just have to reset value lash. Not really going to know for sure till you take a look at it.
    Well seeing as how I tach @ 7200 rpm in 3rd @ 82 I'm guessing it revved to about 12k rpm, but that's a guess, I'm not really sure, but I was a whole gear too low, so it was a significant overrev

  6. #6
    seriously what is it whatisthis's Avatar
    Join Date
    Apr 2008
    Location
    seattle,wa
    Posts
    249
    have a compression test done. that will tell you real fast if there was internal damage done. sounds to me like you may have experienced valve float at high rpm.

  7. #7
    Registered User HondaFreak's Avatar
    Join Date
    Apr 2008
    Location
    San Jose
    Posts
    380
    That's a mechanical over-rev. Welcome to the club. Your probobly looking at a destroyed head. When I did the same thing and I pulled the head, every single valve seat on the exhaust side was broken. Every valve on the exhaust side was bent. The a3 doesn't have vtec on the exhaust side. Hence broken everything on the exhaust side. Your bottom end is probably fine. But the head is gonna need lots of love.
    My car sounded like an STI. That's the bent exhaust valves and the cylinders firing with the exhaust valves open. It's fixable. But if you got the coin it's a good time to do a swap.
    Good luck, I've been there. It feels like shit, but one day you'll look back and laugh.

    Christian

  8. #8
    Registered User
    Join Date
    Jun 2010
    Location
    757
    Posts
    48
    ok so on my way to class this morning the CEL didnt come back on... it doesnt idle like a subaru anymore and its not rough at low rpms... its like the problem just dissapeared... im not going to get my hopes up cause i highly doubt the problem couldve fixed itself haha, im going to get a compression check done and see what they say. gonna be about a week before i can get that done tho. thanks for all the help and advice guys!

  9. #9
    Registered User Jo7man4's Avatar
    Join Date
    Feb 2010
    Location
    Anaheim
    Posts
    36
    I wish this would happen to my a3, then I would have an excuse for the wife to buy an a2 with a 6sp...good luck with your car..

  10. #10
    Registered User
    Join Date
    Jun 2010
    Location
    757
    Posts
    48
    Quote Originally Posted by Jo7man4 View Post
    I wish this would happen to my a3, then I would have an excuse for the wife to buy an a2 with a 6sp...good luck with your car..
    haha yeah. wish i had the coins to swap. id def be doin that if i could.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •