EPR CTR Tir Rod and Ball Joint replacement...HeLP

[rides2000]

I have a us ep3 with Civic Type R suspension. Are the ball joints the same as the US spec and which Tie Rod is recommended (DC5 or ep3)

[LLH]

You need everything off the US ep3 Si :)

[rides2000]

so in regards to tie rod and ball joint I could order off a ep3 us... What about brake pads front and rear?

[LLH]

yes :)

if you got the Civic type r front brakes, Buy RSX-S brakepads and rotors on the front. rear is same on all three.

[rides2000]

so the type r rotors which are 300 mm the same as the type s

[LLH]

Yes, and a couple of others, google brembo 25831

and they should have these specs if you cant find part numbers:

size: 300mm
thinkness: 25mm
minimum thickness :23mm
senter bore 64.1
offset/total thickness: 47mm

[rides2000]

I have the calipers that says type r not brembo. are they the same?

[LLH]

they came on the 30th annyversaty(spell check :p) ep3 type r and maybe on the facelift JDM. But they are still the same as the RSX Type-s :)