Close

Results 1 to 8 of 8
  1. #1
    Registered User Jharobikesr2's Avatar
    Join Date
    Jul 2010
    Location
    Denever CO
    Posts
    90

    Unhappy Supercharger Pulley Problems

    I have recently installed a JRSC on my ep3 and the kit came with a "6psi" pulley Which is the 4" 7 rib Pulley.
    I have been looking for a smaller pulley for my charger and was wondering if anyone came help cause I can't find a smaller pulley. I know they make a smaller pulley kit for the 2006 civic si JRSC kit.

    Would that one work?
    HELP


    Thanks.

  2. #2
    Registered User HondaFreak's Avatar
    Join Date
    Apr 2008
    Location
    San Jose
    Posts
    380
    http://www.pulleyboys.com/store/prod...ge=0&featured=
    Pulley boys makes them. I wouldn't go smaller than 3.7". But others here have gone smaller.

    Christian

  3. #3
    slow & quiet again 4angrybadgers's Avatar
    Join Date
    Dec 2006
    Location
    Hattiesburg, MS
    Posts
    1,189
    Yep, I'd stick with the 3.8" unless you have plans for a water/meth kit or something else to cool the intake charge with a smaller pulley. If you go with a smaller blower pulley, I strongly recommend you get the 2.5" (RSX) idler pulley from Jackson Racing as well. It will reduce your chances of belt slip and give you more room on the tensioner screw.
    Last edited by talonXracer; 10-22-2008 at 01:26 PM.

  4. #4
    B16A = fun WigginsSiR's Avatar
    Join Date
    Apr 2008
    Location
    ct
    Posts
    293
    just bolt a skateboard bearing on there! i think it's like .75"

  5. #5
    Let's Go Pens..... 66elwood99's Avatar
    Join Date
    Aug 2002
    Location
    Beaver,Pa
    Posts
    673
    I trust also that you have kpro and not just a reflash.....order an additional tensioner pulley also they seem to have a limited life span

  6. #6
    Registered User
    Join Date
    Sep 2003
    Location
    whistler
    Posts
    632
    what engine do you have?

  7. #7
    Registered User Jharobikesr2's Avatar
    Join Date
    Jul 2010
    Location
    Denever CO
    Posts
    90
    Where would i be able to pick up a 2.5'' RSX idle pulley?


    I have the K20a3

  8. #8
    0EM xEcuTi0n Ba82Ep3's Avatar
    Join Date
    Feb 2006
    Location
    Mobile, AL
    Posts
    2,251
    Post #3 has your answer...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •