Close

Results 1 to 15 of 15

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User 04EP3Hatch's Avatar
    Join Date
    Apr 2008
    Location
    Milford, PA
    Posts
    1,031

    Exclamation What Flywheel Is This??



    Well guys i need the alingment pins for what i thought was a K20A flywheel that i picked up today, I dont know why i didnt double check myself, but according to photo's, it's not a OEM K20A. I put it on a scale at a shipping center and it's weight is a SCANT 9.5lbs. I am thinking possibly an ACT Prolite? I dont know, i need help guys, im not going to pay to have this cut and reinstall it myself if it's a cheap no name. anyone got a suggestion?

  2. #2
    Murphy's bitch Twisted-X's Avatar
    Join Date
    Apr 2008
    Location
    South Central MI
    Posts
    900
    I'm gonna say no, the cutouts don't look the same. Are there any part numbers or anything on there?



    [stole this image from here]
    Last edited by Twisted-X; 07-16-2010 at 05:29 PM.

  3. #3
    Registered User jh604's Avatar
    Join Date
    Apr 2008
    Location
    Vancouver
    Posts
    645
    looks like Exedy to me

  4. #4
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    Not sure, but it isnt a ACT fly. At 9.5 lbs it would probably be a better fly than the Prolite.
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  5. #5
    Registered User 04EP3Hatch's Avatar
    Join Date
    Apr 2008
    Location
    Milford, PA
    Posts
    1,031
    Quote Originally Posted by jh604 View Post
    looks like Exedy to me
    you think so?

    Quote Originally Posted by talonXracer View Post
    Not sure, but it isnt a ACT fly. At 9.5 lbs it would probably be a better fly than the Prolite.
    you think it'd be safe to use? if it's a cheapie you dont think that'll hurt engine harmonics? and plus the pressure plate alignment pins, there are 3, i only have 2 of them :( are they removable from the stocker? i dont wanna throw off balance at all

  6. #6
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    I would NEVER run any flywheel without having it spun balanced first, especially after having it machined. Also do not forget to add a washer behind the throwout pivot ball or the engagement range of the slave will be adversly affected, this is the reason why Honda specifies that the Kseries fly not be machined, but replaced.

    The pins should be the same as it still uses a clutch meant for a Kseries, and you need all of them.
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  7. #7
    ephatch member 02_epdriver's Avatar
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    487
    Pretty positive it's either a act pro or street lite fly. The street light is a lb or 2 heavier that the pro-lite

  8. #8
    ΜΟΛΩΝ ΛΑΒΕ talonXracer's Avatar
    Join Date
    Apr 2004
    Location
    Catskill Mtns
    Posts
    9,252
    Quote Originally Posted by 02_epdriver View Post
    Pretty positive it's either a act pro or street lite fly. The street light is a lb or 2 heavier that the pro-lite
    It is not any ACT product, I have both the Prolite and Streetlite fly's.
    ALL advice issued with this "Disclaimer"
    Tim "the Toolman" Taylor is my HERO ! ! !

    "Labor Unions are Domestic Terrorist orgainizations"

  9. #9
    ephatch member 02_epdriver's Avatar
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    487
    Quote Originally Posted by talonXracer View Post
    It is not any ACT product, I have both the Prolite and Streetlite fly's.
    If thats is the case then maybe it's an exedy or I'm not sure what a comp fly looks like. I guess it looked really similar to the act's

  10. #10
    Registered User
    Join Date
    Jul 2010
    Location
    california
    Posts
    12
    Yeah I think that is an Exedy man. Not sure though.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •