k24a2 cold air intake?

[RHCP0801]

finished my swap, would love to back to a cai instead of a short ram....do they sell any that fit or it has to be custom made?

[Hybrid_Hatch]

are you running the stock tsx intake manifold? if so you may need to fab your own up, if your using the prb manifold an injen cai will fit right up.

[RHCP0801]

yea i have the rbb mani on there, sucks no one makes one for it...not like its a new swap or anything

[angrose]

what about a RBC intake mani? what intake fits with that?

[02CivicSI-VTEC]

i am running a k24a1/k20a2 with rbc and a injen 3in cai from the ep3. i dont see why cant you put on a cai?

[nightrider2002]

i am running a k24a1/k20a2 with rbc and a injen 3in cai from the ep3. i dont see why cant you put on a cai?

He has the rbb (stock tsx manifold) which is somewhat angled upwards since it has longer runners. The only way I have seen is custom.

[LOVIN MY EP3]

So what the difference between a EP3 and RSX cai ? The reason I ask is because on club rsx there's a d.i.y for a k24a2 and it states he used a injen cai on a k24a2 motor swap with the tsx stock intake manifold...


heres the link for it http://forums.clubrsx.com/showthread.php?t=668765

[RHCP0801]

he doesnt have the rbb mani on there, he is using the rbc

[jh604]

So what the difference between a EP3 and RSX cai ? The reason I ask is because on club rsx there's a d.i.y for a k24a2 and it states he used a injen cai on a k24a2 motor swap with the tsx stock intake manifold...


heres the link for it http://forums.clubrsx.com/showthread.php?t=668765

The CAI are no different (RSX-S is larger diameter but same bends) The reason his fits is because he is using a RBC im + an adapter