+38
is anyone using a 16x8 rim? id like to but i dont know which offset to use . the rim im lookin at is the enkei rpf1 in black. what id like to know is which offset i would need to properly use this wheel and what mods i would have to do to my car to do this
http://www.hondatuningmagazine.com/f.../photo_11.html
+38
Last edited by 27rocks; 11-10-2008 at 09:08 PM.
depends on your drop.
not me...
H&R sport springs-rsx specific
16X8 +38 enkie rpf1
toyo t1r 225/40/16
use +35 .. DrZFinest does.. and his is dope
i personally run 17x7 +40 .. stock 2010 SI wheels.. and they are pretty legit too
i just ordered 16x8 +15 but ill be using a bit of camber to make it fit
powdbyrice im about as low as u, im using megan racing coilovers and i have one figer gap between my tires and the fender. did u have to do any mods to your fenders? ill try and post a pic of my car. btw how much were your rims?
Last edited by whitehonda; 09-21-2010 at 09:18 PM.
now if i use that size of rim i wont be ableto use my factory tire size correct?
^you could use the stock tire
Last edited by ShadowEP3; 09-22-2010 at 12:00 PM.
PSN: theehuggybear
picture whore tonight. 16x8 +10 hahahah too much poke
You should be good with a 16x8 wheel as long as the offset is under +40.
im just debating now between +35 and +38 and possibly running a differnt tire.
you're barely going to notice a dirrerence between 35 and 38 lol if you use a 215 or maybe even a 225 you should be fine. unless you want to stretch...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks