Do these drop the same height as the DC5R suspension?
Went with the Moog brand. Much beefier than stock!
Do these drop the same height as the DC5R suspension?
When I got my moog tie rod ends, you had to screw in the bleeder valves yourself.
Anyone run the aspec rear sway? I read it was like 32mm!?!
Why replace the tie rod ends? and do you replace with honda or acura part?
I can get the tie ends at my local advance auto BUT what part do I need to get?
AND what spring and strut comes with the A-Spec kit?
"A Spec" is a handling package that was offered only on the RSX. It fits our Civic's by using RSX tie rod ends (our are too small) and shaving the rear lower shock bushings.
The A Spec handling kit comes with springs and shocks for all four corners. They are the closest thing you'll get to JDM DC5 ITR springs and shocks.
Thanks DA9_GSR ...
SO can I go to Advance Auto and buy 02-06 RSX-S Type Tie rod ends?
Last edited by bunk; 04-27-2009 at 10:16 AM.
Thanks tlikethedrink...
So if I go with the A-Spec can I use:
Moog Tie Rod End Part No. ES80995
?
Np dude. Don't remember part no. - just ask for tie rod ends at o'reillys for an rsx-s.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks