Are the wheels new? If it is , then it should come with the hubcentric rings.
I know theres a thread right below for an 03, but I didnt know if the hub bore changed from 02/03-04/05.
I ordered a set of wheels and need to know what size hubcentric rings to buy for my 04 EP. Thank you.
Are the wheels new? If it is , then it should come with the hubcentric rings.
the 04/05 hub dia is 64.1mm. you'll need to figure out what the hub diameter of your wheel is to get the proper hubcentric ring. u can usually figure it out based on the wheel manufacturer
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
What is the Hub bore on the 2003 models? Sorry new mwmber here.
Thanks
You don't really need to run them. Most manufacture the rims to run without them.
Christian
Last edited by HondaFreak; 02-15-2011 at 10:14 AM.
Mine is a UK built (but sold in Dubai) Type-R 2003 Left Hand drive with 5 lugs.
Would the Hub bore still be 56.1?
Thanks
i believe yours is 64.1 since its 5 lug but either wait for someone else to answer or just go and measure it which is easy to do
Measured on my 2003 Left hand drive (UK built) & its 63.5
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks