Close

Results 1 to 10 of 10
  1. #1
    Registered User
    Join Date
    Jul 2008
    Location
    AL
    Posts
    238

    Need a tune for JRSC-R, Kpro, Crower Stg 2 Cams, RH, ETC

    I need something just to allow me to keep driving the car without issue. I dyno/tune on the 20th so if anyone has a good tune with a JRSC and Crower S2 Cams please hit me. I can reward with a discount or send out a free gift! THANKS!

    I have not installed the Meth kit yet even though I am almost finished with the wiring, I need to get a new tank and figure out where the f*&^ I can mount it

    My Mods:

    K20A3
    EP3 Specific JRSC
    K-pro
    440cc Injectors
    Jmercado Modified OEM Auto Tensioner
    3.8 Pulley
    Crower Stage 2 Cams
    KRRH/CRSX-RH
    Custom 3" Exhuast
    Injen 3" CAI (RSX Specific - Injen SP1576)
    Innovative 60A Motor Mounts
    Hybrid Racing Shift Cable Bushings
    MTEC Shift Lever Springs
    CC Stg 4 w/ Lightweight Flywheel
    62" Gatorback belt
    NGK 7 Iridium Plugs

    Josh

  2. #2
    Registered User 04EP3Hatch's Avatar
    Join Date
    Apr 2008
    Location
    Milford, PA
    Posts
    1,031
    hey pm superchargedk20, he might be able to email his to you, he had the same cams

  3. #3
    big block turbo club superchargedk20's Avatar
    Join Date
    Apr 2008
    Location
    2 cars ahead of you
    Posts
    2,462
    na i aint got it anymore lol

  4. #4
    ephatch member SandBagger's Avatar
    Join Date
    Nov 2010
    Location
    hampton
    Posts
    110
    RC 650 or 750cc injectors. Ep3 JRIM will not work on 550cc AND 440cc is too small

  5. #5
    Registered User
    Join Date
    Jul 2008
    Location
    AL
    Posts
    238
    Quote Originally Posted by 02sik24a2 View Post
    RC 650 or 750cc injectors. Ep3 JRIM will not work on 550cc AND 440cc is too small
    Going 650 or 750cc when I swap to a K24A2

  6. #6
    ephatch member SandBagger's Avatar
    Join Date
    Nov 2010
    Location
    hampton
    Posts
    110
    Right. The spray pattern of the 440 works. 550 doesn't. Still a tuner could get more power for you with the 650 spray pattern.

    I loved my SC K24a2. I have a few suggestions for the SC K24a2 build you are doing before you go to the tuner:

    1. A good header
    2. High flow cat and 3" exhaust
    3. 3" CAI
    4. 9psi (M5's will not like you
    5. Light weight wheels
    6. LSD
    7. 4.3 Final drive 6spd

  7. #7
    Registered User
    Join Date
    Jul 2008
    Location
    AL
    Posts
    238
    Quote Originally Posted by 02sik24a2 View Post
    Right. The spray pattern of the 440 works. 550 doesn't. Still a tuner could get more power for you with the 650 spray pattern.

    I loved my SC K24a2. I have a few suggestions for the SC K24a2 build you are doing before you go to the tuner:

    1. A good header
    2. High flow cat and 3" exhaust
    3. 3" CAI
    4. 9psi (M5's will not like you
    5. Light weight wheels
    6. LSD
    7. 4.3 Final drive 6spd
    1. Check - KRRH/CRSXRH
    2. Check - No cat and a custom 3" with vibrant flat black muffler and the ultra quiet resonator
    3. Check - Injen SP1576 3" with Injen Dry Filter + Hydroshield
    4. Check - Now that its cold I'm running around 9psi but I'm hoping to move to 11-13psi with Meth and aftercooler (Have meth now)
    5. Check - 5 spoke Axxis Hollow Spokes in 17x7
    6. Check - Will have one
    7. Check - Same along with TSX 6th gear (Prob in a type R trans)

    Sound like I'm on the right track ;) ?

  8. #8
    ephatch member SandBagger's Avatar
    Join Date
    Nov 2010
    Location
    hampton
    Posts
    110
    Have you contacted Ba82ep3 here?

    I didn't have a cat either. Do you have a Short shifter?

    I went through a Stage1 Exedy, I had to go to a stage 2 clutch (Exedy).....it handled the power great. Do the LSD then, if you can afford

    Check out Scuffer's K20a.org custom intake piece for the JRSC. I always wanted to play around with a ported exhaust side only head for SC'n and larger exhaust valves.

    Experiment with good race gas like VP 103 unleaded oxygenated, the combustion will love you like the blower likes 32 deg F

  9. #9
    Registered User
    Join Date
    Jul 2008
    Location
    AL
    Posts
    238
    Quote Originally Posted by 02sik24a2 View Post
    Have you contacted Ba82ep3 here?

    I didn't have a cat either. Do you have a Short shifter?

    I went through a Stage1 Exedy, I had to go to a stage 2 clutch (Exedy).....it handled the power great. Do the LSD then, if you can afford

    Check out Scuffer's K20a.org custom intake piece for the JRSC. I always wanted to play around with a ported exhaust side only head for SC'n and larger exhaust valves.

    Experiment with good race gas like VP 103 unleaded oxygenated, the combustion will love you like the blower likes 32 deg F
    I haven't contacted him yet. Got the flu from my pops Wed. Succkks.

    I've seen scuffers post and read ATON on crsx. Good stuff.

    Not bad on the race gas but I've decided to hold off on the EP and I'm going to finish up my FD. Hoping to make 650-700whp with it on pump gas. I'm hoping to be done with it by July next year as I'm about 10-11K away from finishing it I may have my build thread on this forum if others are fine with it and that way the locals here won't know it's going together

    Josh

  10. #10
    ephatch member SandBagger's Avatar
    Join Date
    Nov 2010
    Location
    hampton
    Posts
    110
    Quote Originally Posted by neoamd View Post
    I haven't contacted him yet. Got the flu from my pops Wed. Succkks.

    I've seen scuffers post and read ATON on crsx. Good stuff.

    Not bad on the race gas but I've decided to hold off on the EP and I'm going to finish up my FD. Hoping to make 650-700whp with it on pump gas. I'm hoping to be done with it by July next year as I'm about 10-11K away from finishing it I may have my build thread on this forum if others are fine with it and that way the locals here won't know it's going together

    Josh
    get well man.

    -gabe

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •