Help k24 swap

[20boostedep02]

So I swapped a k24a4 I to my 2002 ep3 everything went perfect with swap. The k24 TB had a broken sensor and now I need to switch it I was just going to use the k20a3 for the time being. The k20a3 has a map sensor on the TB on the k24 it's on the intake manifold now I have 2 map sensors on the car . My question which one I can take off and block some how. Lmk Asap

[talonXracer]

You will need a Karcepts adaptor, the EP3's TB has a different bolt pattern.

plug the mani port, the easiest way to do that is to keep the a4's map sensor there and simply connect the harness to the map sensor on the TB. The TB provides a more stable map signal, it greatly helps when tuning Kpro.

[20boostedep02]

this is the k20a3 TB the k24 TB has the broken sensor in the 2nd picture is there a way to take this off and put it on the other one for the time being if so let me know please only thing holding this thing from getting tuned and running

Thanks, Mike