Quick Install Question

[sugie]

I'm almost done my JRSC install, but I'm having trouble getting the fuel rail and injectors on. It seems like the damper in the middle of the rail is getting hung up on the manifold for the charger. If I put the injectors in first, the damper won't let the fuel rail seat into the studs on the manifold. If I try to put the rail into the studs first, the injectors aren't even close to going into the holes on the manifold.

Any suggestions?

[K20A EP3]

i ran into this problem a while back. i ended up using 3 spacers each side. Waddled the holes on the rail and got it to fit, use a lil lube too

[sugie]

Cool thanks I'll try the spacers. I did lube up the injectors, I have no problem getting them in the manifold it's just the rail not lining up that's giving me problems.

[jh604]

I put the rail in first then slip the injectors on after.

[Sucka]

i ran into this problem a while back. i ended up using 3 spacers each side. Waddled the holes on the rail and got it to fit, use a lil lube too

+ 2