How To: Remove your OEM seat belt buckle when installing a Bucket seat and or Harness

[Manny Kid 15]

Can you make me one for my steering wheel I need to turn the light off....

X2 i want this too, just not to bright when it comes to wiring things

[zdiddy22]

great write up.

[SHG_EasyE]

X2 i want this too, just not to bright when it comes to wiring things

I'm actually going to the junkyard tomorrow to get some plugs. How much are you guys willing to pay for these things?

[EPWRC]

Awesome, thanks a lot! I had just put in some bucket seats and had done the resistor trick and couldn't get the airbag light to shut off. I wasn't aware that you had to ground the belt plug too.

Thanks again!

[SHG_EasyE]

Gool glad i could help!

[civictype_r04]

I need one for my steering wheel and both seats. I just picked up some buckets and need to turn off all the lights when I install them. Or do you know the part number for the plugs so I can order them from honda??

[SHG_EasyE]

I need one for my steering wheel and both seats. I just picked up some buckets and need to turn off all the lights when I install them. Or do you know the part number for the plugs so I can order them from honda??

You cant get the plugs from Honda, they are part of the SRS harness. I can make 3 for you Im selling them for $10 a peice shipped. Same as the ones i made for my car :)

[civictype_r04]

You cant get the plugs from Honda, they are part of the SRS harness. I can make 3 for you Im selling them for $10 a peice shipped. Same as the ones i made for my car :)

Ill take 3 then..... am I going to need the yellow and the gray?????

[SHG_EasyE]

Ill take 3 then..... am I going to need the yellow and the gray?????

For the wheel you just need one yellow srs plug. For the seats it depends what youre going to do. If you just want to disable the belt tensioner then you only need a yellow plug. But if you want to get rid of the stock buckles completely youll also need the grey ones. So 5 plugs all together. Id o all 5 for $45

[civictype_r04]

For the wheel you just need one yellow srs plug. For the seats it depends what youre going to do. If you just want to disable the belt tensioner then you only need a yellow plug. But if you want to get rid of the stock buckles completely youll also need the grey ones. So 5 plugs all together. Id o all 5 for $45

Ill do all 5 then!!!

[civictype_r04]

This will do the side srs right?

[SHG_EasyE]

This will do the side srs right?

Not sure if side SRS has a separate yellow plug. Take a look at your seats and see how many connections there are to the car. My car is an 02 so I dont have the side SRS.

[civictype_r04]

Not sure if side SRS has a separate yellow plug. Take a look at your seats and see how many connections there are to the car. My car is an 02 so I dont have the side SRS.

Ok Ill take a look and let you know..

[Slip_Angle]

Just want to say thanks for this "How To". My SRS light was on (Code 9-3) so I did the resistor by-pass per your write-up and worked great!

Thanks again.

[SHG_EasyE]

Great glad it was useful!