i seen but i didnt trust it idk, tell me how it goes for u
so i saw this on ebay, didnt really know if anyone on here had bought one from the same buyer so i decided to go out on a limb and buy it
http://cgi.ebay.com/ebaymotors/ws/eB...0860&viewitem=
it was only 70 shipped
anyone else see this before?
anyway ill update the thread with pics when i get it
i seen but i didnt trust it idk, tell me how it goes for u
Last edited by cow; 12-02-2008 at 09:52 PM.
crazy to see as our cars become more affordable, more and more replica parts become cheaper and cheaper
let us know how it goes
You should DIY the lens to the 3rd tail light red
In the pics it looks like it has the notches that only fit the non usdm hatch
but I could be wrong
I don't like the pics they have there
they label it as primered, but show it painted and cleared
take some good pics so we can see how flush it sits :D
It doesn't show the back part that touches the glass, that's the only difference between the EDM/JDM and USDM wings. If it has the just cut the out with a dremel and patch with fiberglass. It looks like one of those gelcoated fiberglass replicas. Good luck with it
i'm very curious as to fitment
theres so many ebay threads popping up. im not sure if its a good or bad thing.
ps, its white primer, and yes, primer can reflect light. it was professionally sprayed.
For the record there is no difference between the type r hatch and the usdm hatch.
.the difference is the glass has cutouts for the wing. If you open your hatch and look underneath near the top on the outside there are holes that have been epoxyed over...those are the mount holes for the type r wing mounts that we have to shave off for our glass...just an fyi...
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
well ill definitely make a diy, probably of how i remove the notches to make it flush
im interested in how this turns out....
you cant beat this deal, even if the fitment is a little off.
Is it a replica of the HFP wing? Definitely interested in seeing how it fits, I want to replace this stock spoiler with something a little different!
Any updates OP?
Last edited by ep3demic; 12-04-2008 at 03:53 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks