Close

Page 1 of 13 12311 ... LastLast
Results 1 to 15 of 679

Thread: EMUSA info

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114

    EMUSA info

    Here's the turbo kit we've been talkin' about. I'll try to keep the first post updated with all the info so its easy to access.

    http://www.emotorusa.com/index.asp

    EM-USA = E-Motor USA of Indianapolis.

    beats the hell out of this page:

    http://www.emusaautomotive.com/

    you can buy everything they make from http://www.speedyracer.com

    Just thought I'd share.

    EP3 Turbo Kit Installation Guide
    EMUSA Wastegate Instructions

    Rolldogk20's Cal - RBC IM, RC750 Injectors, 4Bar Hondata MAP, Hondata Boost Solenoid, 2.5 Straight Pipe, Stock Fuel Pump 8.5 PSI - Use at your own risk!


    Things you HAVE to buy:
    Injectors (something along 550cc or above)
    Dump Tube (make your own or ebay one, either ebay tube will work, they cost like $30)
    Kpro
    3" - 2.5" or 2.25" silicone reducer
    Hondata 4bar MAP Sensor (if your going over 10 psi)

    Things you might want to buy
    MAC Boost Solenoid
    Hondata 4 Bar MAP Sensor
    #7940 NAPA Rad Hose
    2.25"ID x 3"ID 4Ply Silicone Coupler
    Deatschwerks Injectors - or whatever you wanna run.
    Deatschwerks 65c Fuel Pump - or a walbro 255, the 65c requires no cutting or strapping. direct replacement for OEM.
    38mm Dumptube on ebay, there are 2 types and either will fit, i would sugggest the one thats bent in the middle.M14 Banjo Bolt or TSI Timing Cover Inspection Plate Return (you can email them @ sales@turbospecialties-race.com) for $25.
    ATP Oil Restrictor
    TP8 from these guys. - Don't be scared to order from them, I live in CA and it look only 3-4 days to get. Thats faster than most of my ebay purchases.
    Make your own oil feed/return lines, its cheap and easy.
    Vacuum Block
    Gauges
    K-Pro

    Spark Plugs:
    Stock spark plugs from NGK - IZFR6K11
    Stock spark plugs from Denso - IK20L

    Colder plug I found on google that everyone else is using (to my knowledge) is the NGKs below, or Denso IK22's.
    IRIWAY7 cross reference BKR7EIX
    IRIWAY8 cross reference BKR8EIX

    Turbo rebuilt to Garrett Specs - http://www.blaastperformance.com/index.php > Remanufacturing service > Knock-off T3/T4, upgrade to Garrett (XSP,ZY) - $260 w/6 month warranty
    Quick Link to install instructions - HERE
    Quick Link to Greddy piping mod - HERE

    Found out that I actually got a 6 psi spring in my wastegate, read other websites and they list the springs as 4(little spring under cup),6 (Stock), 8(+2 spring) and 10(+4 Spring). but some people have received 4(little spring under cup), 8 (stock), +1 and +2.

    Made 247hp, 221tq @ 6 psi
    Made 297hp, xxxtq @ 8 psi
    http://www.youtube.com/watch?v=63jGMyloI1M

    Quote Originally Posted by japarossa View Post
    Ok here is the manual for the Intercooler piping and turbo,











    And the wastegate











    Also, someone said on another forum, the coilovers are comparable to Racelands.
    And they are made by the same company that makes Megan stuff.
    Last edited by AKEP; 05-28-2013 at 05:24 AM.

  2. #2
    Boosted EP3 !!! rolldogK20's Avatar
    Join Date
    Mar 2010
    Location
    Pomona, Ca
    Posts
    54
    Good find i been trying to get info about this brand !!!

  3. #3
    Registered User Rictorious88's Avatar
    Join Date
    Sep 2008
    Location
    Texas
    Posts
    241
    Very nice info!

    hey gtimportfanatic and/or japarossa was there any issue with little stuff missing from the EMUSA kit (bolts, hoses, gaskets, etc) or them being of really poor quality?

  4. #4
    BoostedK24a2 japarossa's Avatar
    Join Date
    Oct 2009
    Location
    Down the 1320
    Posts
    447
    I have the Emusa manual in a email/word document and cant figure out how to post it on the forum, if someone knows how to do it pm me with your email and I will email it to you.

    EDIT: Emailed to AUtiger so hopefully he can find a way to post it, if not I can email it to anyone who wants it
    Last edited by japarossa; 01-09-2011 at 03:51 PM.

  5. #5
    Registered User USAF EP3's Avatar
    Join Date
    Nov 2009
    Location
    Pinellas Park, FL
    Posts
    886
    You can email it to me :)

    Also, did you guys have to remove your rebar to fit the intercooler/charge piping? I ended up removing mine.

    And, am I going to have any issue clearing my foglights?

  6. #6
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114
    outstanding. i can upload it to a file hosting service and whatnot. i keep alot of stuff online and archived on my external. i have all sorts of manuals n stuff.
    mugenep3@gmail.com if you wanna.

  7. #7
    Registered User civictype_r04's Avatar
    Join Date
    Jul 2005
    Location
    THE *215*
    Posts
    3,868
    Good info dude!!!

  8. #8
    BoostedK24a2 japarossa's Avatar
    Join Date
    Oct 2009
    Location
    Down the 1320
    Posts
    447
    No nothing missing from the kit except the coupling to go from the IC piping to the TB. Not missing just not included. I also replaced the turbo to manifold bolts because the ones that came with it were cheap. All the gaskets were good quality and they actually sent me 2 of each. The Cat pipe needs to be altered because it has a little bend at the end you have to cut off and you need to have a 3 bolt flange welded on to fit up with Ep exhaust. I think the Cat. pipe is made to fit up to their RSX 3" Cat. back exhaust. Other than that the kit fit good

  9. #9
    ephatch member jones02's Avatar
    Join Date
    Dec 2010
    Location
    ontario
    Posts
    106
    wat number are you getting with the k24a2? and what size inj. you using with that set up?

  10. #10
    ephatch member
    Join Date
    Apr 2008
    Location
    Chicago Area
    Posts
    1,240
    Quote Originally Posted by japarossa View Post
    No nothing missing from the kit except the coupling to go from the IC piping to the TB. Not missing just not included. I also replaced the turbo to manifold bolts because the ones that came with it were cheap. All the gaskets were good quality and they actually sent me 2 of each. The Cat pipe needs to be altered because it has a little bend at the end you have to cut off and you need to have a 3 bolt flange welded on to fit up with Ep exhaust. I think the Cat. pipe is made to fit up to their RSX 3" Cat. back exhaust. Other than that the kit fit good
    what about the dumptube? gtimportfanatic said that his only came with the gaskets and that a custom dumptube had to be made. I just figured I would order the dumptube from godspeed since it's just the flange w/ a 90* bend and a straight section that might need cutting to avoid the subframe but should be pretty easy to fix.

  11. #11
    BoostedK24a2 japarossa's Avatar
    Join Date
    Oct 2009
    Location
    Down the 1320
    Posts
    447
    The kit comes with dump tube flanges but no tube, I forgot that it wasn't included because I cut up my stock Ep3 exhaust manifold and made a nice dump tube that fits like its an oem part. I would have bought that godspeed one but the shipping to Canada was to expensive.

  12. #12
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114
    We should start the emusa crew. I can join next week!

  13. #13
    Registered User civictype_r04's Avatar
    Join Date
    Jul 2005
    Location
    THE *215*
    Posts
    3,868
    I just emailed them to see how much the 3inch downpipe was for our car I want one!!!!

  14. #14
    Registered User AKEP's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento, California, United States
    Posts
    2,114
    you can buy everything they make from http://www.speedyracer.com - same page from the ebay sites

  15. #15
    Registered User civictype_r04's Avatar
    Join Date
    Jul 2005
    Location
    THE *215*
    Posts
    3,868
    I think I'm gonna get the downpipe!!!!

Page 1 of 13 12311 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •